Journal Paper

1. "Machinability of martensitic and austempered ductile irons with dual matrix structure"
   Mohsen Sabzalipour, Alimohammad Rashidi
   Journal of Materials Research and Technology-JMR and T, pp.6928-6941, 2023
2. "Analytical modeling of the stretching in the ECAPed bimetallic materials"
   Alimohammad Rashidi, Etemadi M
   AUT Journal of Mechanical Engineering, 2021
3. "Shear Strain Distribution in Cylindrical Samples Subjected to Deformation by Various Routes of Equal Channel Angular Pressing"
   Mohammad Etemadi, Alimohammad Rashidi
   Journal of Stress Analysis, pp.21-31, 2021
4. "Effect of Yttria-Stabilized Zirconia Concentration in an Electroless Bath on Microstructure and Composition of Ni/Yttria-Stabilized Zirconia Nanocomposite"
   Samira Almasi, Alimohammad Rashidi
   JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, pp.5592-5602, 2021
5. "The Effect of Bath pH and Temperature on the Corrosion Behavior of Co-Electrodeposited Ni-Cu/Cr2O3 Nanocomposite Coatings"
   Ali Taherimanesh, Alimohammad Rashidi, SHahab Zangeneh
   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, pp.7863-7871, 2020
6. "Investigation wavy interface forming and stretching in severe plastic deformed copper/steel bimetallic rod"
   Alimohammad Rashidi, Mohammad Etemadi
   MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2020
7. "A pH-responsive citric-acid/?-cyclodextrin-functionalized Fe3O4 nanoparticles as a nanocarrier for quercetin: An experimental and DFT study"
   ROBABE BEYGOM GHAFELE BASHI, Mohammad Tavakkoli Yaraki, Leily Heidarpoor Saremi, Aseman Lajevardi, Masoud Haratian, Bandar Astinchap, Alimohammad Rashidi, Rostam Moradian
   MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, 2020
8. "Experimental and artificial neural network investigation on the effect of inclination angle on the interface temperature of CPU/metal foam heat sink"
   Alimohammad Rashidi, Morad Paknezhad, Toraj Yousefi
   INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT and FLUID FLOW, 2018
9. "Nano-Biphasic Calcium Phosphate Ceramic for the Repair of Bone Defects"
   Majid Rezaei, Mohammad Farhadian, Alimohammad Rashidi, Mahshid Saeidipour, Maziar Manshaei, Masih Rezaee
   JOURNAL OF CRANIOFACIAL SURGERY, 2018
10. "Preparation of ultrafine grained copper nanoparticles via immersion deposit method"
    FATEMEH ABBASI KESBI, Alimohammad Rashidi, Bandar Astinchap
    Applied Nanoscience, pp.221-230, 2018
11. "Effect of aluminum0foam heat sink on inclined hot surface temperature in the case of free convection heat transfer"
    Morad Paknezhad, Alimohammad Rashidi, Toraj Yousefi, z. Saghir
    Case Studies in Thermal Engineering, pp.199-206, 2017
12. "Synthesis of tungsten nanoparticles by reverse micelle method"
    ARASH HADAVAND KHANI, Alimohammad Rashidi, Giti Kashi
    JOURNAL OF MOLECULAR LIQUIDS, pp.897-903, 2017
13. "Erosion-corrosion synerism in an alumina/sea water nanofluid"
    Alimohammad Rashidi, Morad Paknezhad, محمد مشرقي
    Microfluidics and Nanofluidics, 2013
14. "Activation energy for formation of nickel-aluminide thin film on nanocrystalline and microcrystalline nickelOriginal"
    Alimohammad Rashidi
    VACUUM, 2013
15. "Comparison of erosion corrosion and erosion-corrosion of carbon steel in fluid containing micro0 and nanosize particles"
    Alimohammad Rashidi, Morad Paknezhad, محمدرضا محمدي اوچمشي, Mohamad Moshrefi Torbati
    Tribology - Materials, Surfaces and Interfaces, pp.114-121, 2013
16. "A Galvanostatic Modeling for Preparation of Electrodeposited Nanocystalline Coatings by Control of Cyrrent density"
    Alimohammad Rashidi
    JOURNAL OF MATERIALS SCIENCE and TECHNOLOGY, 2012
17. "Application of artificial neural network for prediction of the oxidation behavior of aluminized nano-crystalline nickel"
    Alimohammad Rashidi, Mohsen Hayati, a r
    MATERIALS and DESIGN, 2012
18. "Prediction of the mass gain during high temperature oxidation of aluminized nanostrured nickel using adaptiv neuro - fuzzy inference system"
    Mohsen Hayati, Alimohammad Rashidi
    SOLID-STATE ELECTRONICS, 2012
19. "Isotherma Oxidation Kinetics of Nanocrystallin and Coarse Grained Nickel Experimental Resuts and Theoretical Approach"
    Alimohammad Rashidi
    SURFACE and COATINGS TECHNOLOGY, 2011
20. "Prediction of the Relative Texture Coefficient of Nanocrystalline Nickel Coatings Using Artificial Neural Networks"
    Alimohammad Rashidi, Mohsen Hayati, a r
    SOLID-STATE ELECTRONICS, 2011
21. "Prodiction of Grain Size of Nanocrystalline Nickel Coatings Using Adaptive Neuro-Fuzzy Inference System"
    Mohsen Hayati, Alimohammad Rashidi, a r
    SOLID-STATE ELECTRONICS, 2011
22. "A Study on the Aluminizing of Electrodeposited Nickel At 500 c"
    Alimohammad Rashidi, A a
    Iranian Journal of Materials Science and Engineering, 2010
23. "formation of aluminide phase on electrodeposited nanocrystalline nickel"
    Alimohammad Rashidi, A A
    INTERMETALLICS, 2010
24. "effect of electroplating parameters on mirostructure of nanocrystalline nickel coatings"
    Alimohammad Rashidi, A A
    JOURNAL OF MATERIALS SCIENCE and TECHNOLOGY, 2010
25. "The effect of saccharin addition and bath temperature on the grain size of nanocrystalline nickel coatings"
    Alimohammad Rashidi, A A
    SURFACE and COATINGS TECHNOLOGY, 2009
26. "Application of artificial neural networks to predict the grain size of nano-crystalline nickel coatings"
    Alimohammad Rashidi, A E, A A
    COMPUTATIONAL MATERIALS SCIENCE, 2009
27. "Low temperature formation of aluminide layers on nanocrystalline nickel"
    Alimohammad Rashidi, A A
    INTERMETALLICS, 2009
28. "The effect of current density on the grain size of electrodeposited nanocrystalline nickel coating"
    Alimohammad Rashidi, A A
    SURFACE and COATINGS TECHNOLOGY, 2008

Conference Paper

1. "Experimental Investigation on the Effect of Metal Foam on the Enhancement of Natural Convection transfer Heat"
   Morad Paknezhad, Alimohammad Rashidi, Toraj Yousefi, z Saghir
   9th International Conference on Thermal Engineering Theory and Applications,
2. "Aluminizing of nanocrystalline Ni and Ni-W coatings at 500 oC"
   A A, Alimohammad Rashidi
   The 1st international conferance on nanomanufacturing (nano MAN 2008),