فارسی العربیه

profile - Razi University

Faculty Member of Razi University

Razi University
صفحه فارسی
Mohammad Ebrahim Aalami Al Agha

Mohammad Ebrahim Aalami Al Agha

Associate Professor / فني مهندسي

menu

Journal Paper

  1. "An analytical and experimental investigation considering the effect of material flow velocity on tensile strength of a steel alloy joint produced by friction stir welding process"
    Behzad Hadi, Mohammad Ebrahim Aalami Al Agha, Saeid Feli
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2020
  2. "Evaluation Effects of Modeling Parameters on the Temperature Fields and Residual Stresses of Butt Welded Stainless Steel Pipes"
    Saeid Feli, Mohammad Ebrahim Aalami Al Agha, محمدرضا جهانبان
    Journal of Stress Analysis, pp.25-33, 2016
  3. "3-D numerical evaluation of residual stress and deformation due welding process using simplified heat source models"
    Amirhossein Eslampanah, Mohammad Ebrahim Aalami Al Agha, Saeid Feli, mohamad reza ghaderi
    Journal of Mechanical Science and Technology, pp.341-348, 2015
  4. "Analysis preheat effect on thermal cycle and residual stress in welded connection by FE simulation"
    Mohammad Ebrahim Aalami Al Agha, Mehrdad Forotan, Saeid Feli
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2014
  5. "Mechanical constraint effect on residual stress and distortion in T-fillet welds by three-dimensional finite element analysis"
    Mohammad Ebrahim Aalami Al Agha
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2013
  6. "Finite Element Simulation of Welding Sequences Effect on Residual Stresses in Multipass Butt-Welded Stainless Steel Pipes"
    Saeid Feli, Mohammad Ebrahim Aalami Al Agha, Mehrdad Forotan, احسان برزآبادي فراهاني
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2012
  7. "Investigation of Hydrostatic Pressure Effect on the Residual Stresses of Circumferentially Butt-Welded Steel Pipes"
    Mehrdad Forotan, Mohammad Ebrahim Aalami Al Agha, Saeid Feli, Saeid Nickabadi
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2012
  8. "Promotion of Metallic Catalysts by Metal Oxide Powders in Partial Oxidation of Methane"
    Ronak Saborizade, SHahram SHarifnia, Mohammad Ebrahim Aalami Al Agha, MOHAMMAD REZA PANAHI
    Journal of the Taiwan Institute of Chemical Engineers, 2012
  9. "Correlated macrostructural parameters of weld and weld current in the SMAW of small pipes"
    Mohammad Ebrahim Aalami Al Agha
    Journal of Mechanical Science and Technology, 2012
  10. "Investigation of Joint Groove Geometry Effect on the Residual Stresses in Circumferentially Butt-Welded Steel Pipes by the FEM Simulation"
    Mehrdad Forotan, Mohammad Ebrahim Aalami Al Agha, ثروت پيرمرادي
    Advanced Materials Research, 2011
  11. "Grain Growth Evaluation in HAZof Welded Pipes Using Dimeniosonless Parameters and Optimum per-Exponential Constant for Sean Weld and Seamless Pipes"
    Mohammad Ebrahim Aalami Al Agha, سجاد رسائي
    Advanced Materials Research, 2011
  12. "A New Analytical Model of Normal Penetration of Projectiles into the Light-weight Ceramic-metal Targets"
    Saeid Feli, Mohammad Ebrahim Aalami Al Agha, زين العابدين احمدي
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2010
  13. "Removal of hydrogen sulfide from Gas Stream Using a Novel Metal Membrane Prepared by wire Arc spraying"
    سيدسياوش مدائني, Mohammad Ebrahim Aalami Al Agha, بابك طاعي, Mehdi Amirinejad, Parisa Daraei
    International Journal of Chemical Reactor Engineering, 2010
  14. "FEM Simulation of Splatting of a Molten Droplet in Thermal Spray Coating"
    Mohammad Ebrahim Aalami Al Agha, Saeid Feli, A A
    COMPUTATIONAL MATERIALS SCIENCE, 2010
  15. "Preparation and Characterization of Metallic Catalyst Using Wire Arc Spraying and its Application in Partial Oxidation of Methane"
    SOMAYEH KAMALIFAR, SHahram SHarifnia, Mohammad Ebrahim Aalami Al Agha, محمدرضا پناهيان
    CATALYSIS COMMUNICATIONS, 2010
  16. "A new Application of thermal spray in preparation of metallic membrane for concentration of glucose solution"
    Mohammad Ebrahim Aalami Al Agha, سيدسياوش مدائني, Parisa Daraei
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2009
  17. "Preparation and characterization of metallic membrane using wire arc spraying"
    سيدسياوش مدائني, Mohammad Ebrahim Aalami Al Agha, Parisa Daraei
    JOURNAL OF MEMBRANE SCIENCE, 2008
  18. "Influence of the HVOF spraying Process on the microstructure and corrosion behaviour of Ni-20 Cr coatings"
    Mohammad Ebrahim Aalami Al Agha
    JOURNAL OF MATERIALS SCIENCE, 2003

Conference Paper

  1. "FEA of Electrod Velocity Effect on Thermal Cycle and Residual Strees in Connected by Multi Pass Weld"
    Saeid Feli, Mehrdad Forotan, Mohammad Ebrahim Aalami Al Agha, احسان برزآبادي فراهاني
    Advances in Materials and Processing Technologies,
  2. "Investigation of joint groove geometry effect on the residual stresses in circumferentially butt-welded steel pipes by the fem simulation"
    Mehrdad Forotan, Mohammad Ebrahim Aalami Al Agha, ثروت پيرمرادي
    AMPT2009,
  3. "A Novel Partial Oxidation of Methane Catalyst Synthesized by wire Arc Spraying Technique"
    SOMAYEH KAMALIFAR, r f, Mohammad Ebrahim Aalami Al Agha, محمدرضا پناهيان, SHahram SHarifnia
    The 14th International Congress on Catalysis,
  4. "Grain growth evaluation in haz of welded pipes using dimensionless parameters and optimum pre-exponential constant for seam weld and seamless pipes"
    Mohammad Ebrahim Aalami Al Agha, سجاد رسائي
    The International Conference on Advances in Materials and Processing Technologies(AMPT 2009),
  5. "Evaluation Weld Current Effect on Heat Affected Zone Grain Growth in Process of Arc Welding Using Dimensionless Parameters"
    Mohammad Ebrahim Aalami Al Agha
    AMPT 2011,

Update: 2024-12-11