profile - Razi University
Faculty Member of Razi University
Razi University
Kiomars Bahrami
Professor / Department of Chemistry / Organic chemistry
Current courses
| Course Name | unit | term |
|---|---|---|
| 3 | 3 | first semester Academic year 2026-2027 |
| chime | 3 | first semester Academic year 2026-2027 |
| Organic Compounds Identification | 3 | first semester Academic year 2026-2027 |
Master Theses
-
Synthesis, characterization and application of bimetallic metal-organic frameworks of iron and zinc supported by copper iodide as a heterogeneous catalyst for catalytic hantzch reaction and oxidative desulfurization of dibenzothiophene
Maryam Salar Abadi 2026The bimetallic iron-zinc metal-organic framework (MOF) was synthesized using iron(III) nitrate nonahydrate (Fe(NO3)3·9H2O), zinc nitrate hexahydrate (Zn(NO3)2·6H2O), and terephthalic acid as the organic linker. Following the synthesis of the Fe-Zn MOF, CuI nanoparticles were successfully immobilized onto the framework, resulting in the formation of CuI@Fe-Zn nanoparticles. To elucidate the structural and compositional characteristics of the synthesize CuI@Fe-Zn nanoparticles, a comprehensive characterization was performed employing a variety of analytical techniques, including FTIR, XRD, EDX, FESEM, TGA and BET. This multifaceted characterization approach provides valuable insights into the structural integrity, morphology, and potential applications of the CuI@Fe-Zn nanoparticles in various fields of research.
-
Synthesis, characterization and application of bimetallic metal-organic framework of iron and zinc supported by nickel nanoparticles as a heterogeneous catalyst for catalytic reduction of nitroarenes and oxidation of benzyl alcohols by hydrogen peroxide
Nesa Karimi 2026 -
Synthesis, Characterization, and Applications of Bis (2-Hydroxyethyl)ammonium Trifluoroacetate as an Efficient Catalyst in the Preparation of Benzodiazepine Heterocyclic Derivatives and 2-Benzylidene Malononitrile Derivetives
2026 -
?Application of the UiO-66-NH2@WCl6/H2O2 catalytic system for the oxidation of organic sulfides and the synthesis of sulfonyl chlorides
Rahim Tavari Zamelah 2025Abstracts??UiO-66-NH?@WCl?/H?O? as a Robust MOF-Based Catalyst for Chemo-Selective Oxidation of Sulfides to Sulfoxides and Sulfones under Green and Sustainable Conditions
-
Investigation of the Effect of Fe/Al organic framework particles on Mechanical Properties and Corrosion of Unsaturated Polyester Resin.
Zeinab Khodamoradi 2025Unsaturated polyester resin (UPR) is widely used in the composite industry due to its desirable properties such as low cost and good processability. However, its low corrosion resistance, high brittleness, and flammability limit its applications in various industrial fields. To overcome these limitations, the incorporation of reinforcing particles into the resin has recently been proposed as an effective approach. In this study, bimetallic metal–organic frameworks (Fe/Al-BDC-NH?) were employed as reinforcing additives to investigate their effect on the physical–mechanical properties and corrosion resistance of unsaturated polyester resin. Owing to their hybrid structure, the MOF particles—with metallic sites enhancing mechanical performance and organic linkers enabling interfacial bonding with polymer chains—prevented particle sedimentation and improved the uniformity and adhesion of the polymer network. Structural and performance analyses of the composites were carried out using XRD, FT-IR, FE-SEM, DMA, and electrochemical impedance spectroscopy (EIS). The results revealed that the incorporation of a small amount of Fe/Al-MOF significantly increased the storage modulus, improved interfacial adhesion, enhanced electrochemical stability, and reduced the permeability of the resin in corrosive environments. Overall, the presence of bimetallic MOF particles remarkably improved the mechanical and anti-corrosion performance of the unsaturated polyester resin and offers a promising route for developing high-performance, corrosion-resistant coatings and composites for industrial applications.
-
Synthesis, Characterization and Application of Bis(2-hydroxyethyl) ammonium 2,2,2-Trifluoroacetate Ionic liquid as an Efficient Catalyst for the Synthesis of Dihydropyrimidinones and Dihydroquinazolinones Derivatives
Saba Ghaderi 2025 -
Photooxidation of Sulfides and Photooxidative Desulfurization with MOF-808 and NH2-MIL101(Fe)
Nasrin Khalili mehr 2023Photooxidation of sulfides to sulfones and photooxidative desulfurization with H2O2 in the Presence of MOF-808 Visible light-induced photocatalysis is a promising way for green chemistry goals due to efficient utilization of solar energy. Recently, metal–organic frameworks (MOFs) have attracted increasing attention in the field of photocatalysis. In comparison with traditional metal oxide semiconductors, MOFs have many advantages, such as high specific surface area, rich topology and easily tunable porous structure. In first section, the successful synthesis of MOF-808 is presented. The structure of the as-prepared MOF-808 was characterized by X-ray diffraction (XRD), N2 adsorption–desorption, Field emission scanning electron microscopy (FESEM), Energy dispersive X-ray (EDX) mapping analysis, Fourier transform infrared spectroscopy (FTIR), and Thermogravimetric analysis (TGA). MOF-808 was used as a photocatalyst for the oxidation of sulfides to sulfones in the presence of H2O2 under visible light with high selectivity. Furthermore, the system exhibited excellent performance for the oxidation of dibenzothiophene to the corresponding sulfone. Photooxidation of sulfides to sulfoxides with H2O2 in the Presence of NH2-MIL-101(Fe) In this section, NH2-MIL-101(Fe) is fabricated through a general facile strategy. Then, oxidovanadiumIV acetylacetonate ([VO(acac)2]) was immobilized successfully into the NH2-MIL-101(Fe) framework (NH2-MIL-101(Fe)/VO(acac)2). The resulting nanomaterials were characterized by several techniques. NH2-MIL-101(Fe)/VO(acac)2 subsequently tested for its photocatalytic activity in the selective photo-oxidation of sulfides. The NH2-MIL-101(Fe)/VO(acac)2 photocatalyst provided up to 98% sulfide conversion with over 99% selectivity for sulfoxide.
-
The loading of nanoparticles (NPs) on metal-organic frameworks (MOFs) has attracted special attention in recent years. Metal-organic frameworks provide abundant active sites for photocatalyst activities due to their high surface area and high porosity along with metal nanoparticles. In the present r
Samira Mohamadi 2023Abstract The thesis consists of two section: Oxidation sulfide to sulfoxide Metal-organic frameworks (MOFs) have attracted a lot of attention in the field of photocatalysis because MOFs make shift from using photocatalyst in UV to visible light and improve photocatalytic activity and selectivity. In this work, Ti-MOF (NH2-MIL-125(Ti)) was synthesised by solvothermal method, then NH2-MIL-125(Ti)@CuCoNi was prepared by loading trimetallic Cu-Co-Ni nanoparticles ( ) on NH2-MIL-125(Ti) through a solution impregnation method for use as a heterogeneous photocatalyst. The crystallinity, functional groups, morphology, elemental composition, specific surface area, thermal stability and optical properties of the catalyst were characterized by different techniques, such as Powder X-Ray diffraction (PXRD), Fourier transform infrared spectra (FTIR), Field emission scanning electron microscopy (FE-SEM), Energy dispersive spectroscopy (EDS), Brunauer–Emmett–Teller analysis (BET), Thermogravimetric analysis (TGA) and UV-Vis diffuse reflectance spectra (DRS). The NH2-MIL-125(Ti)@CuCoNi was used for the selective photocatalytic oxidation sulfides to sulfoxides in the presence of H2O2 30% under visible light irradiation and the products were obtained with good to high yields. Dye degradation H2-MIL-125(Ti)@CuCoNi was used as high efficiency heterogeneous photocatalyst for the degradation of Rhodamine B dye under optimal conditions and visible light irradiation. the degradation rate of Rhodamine B in the presence trace amount of H2O2 30% under visible light irradiation was 96.28%. Keywords: Metal-organic framework, NH2-MIL-125(Ti), NH2-MIL-125(Ti)@CuCoNi, Nanoparticles, Photocatalyst, Oxidation, Sulfide, Sulfoxide, Dye degradation.
-
Diethanolammonium Formate as a Promoter and Ionic Liquid Medium in Knoevenagel Condensation and Synthesis of Perimidine Derivatives
2023Diethanol ammonium formate as a base Bronsted chemoselctive ionic liquid was synthesized as follows. Dropwise addition of formic acid was done in ice cold diethanol amine. Ice bath was removed once the addition was completed after 45 min and the ionic liquid was obtained after 24 h with excellent yields. Diethanol ammonium formate as a chemoselective Bronsted basic ionic liquid catalyst reported for the Knoevenagel condensation of aromatic aldehydes with malononitrile to synthesis of arylidene malononitrile derivatives. This ionic liquid has advantages such as high stability, low cost raw materials, air insensitivity and mild reaction conditions. A variety of 2-substituted perimidine derivatives obtained from the reaction of naphthalene 1,8-diamine with aryl aldehydes in the presence of dimethyl ammonium formate at room temperature. High to excellent yield of products, short reaction times and low cost are some of the significant advantages of this method.
-
Synthesis of 4H-benzo[b]pyrans and Dihydropyrimidinones derivatives using 2-hydroxy ethylammonium formate as an ionic liquid
2023First of all, thanks God for countless blessings all through my life. Without his assistance, no work was possible. There is no doubt that no one can complete his dissertation without a good deal of help along the way and this thesis is certainly not an exception. I would like to express my sincere thanks to my supervisor, Dr. Kiumars Bahrami, who encouraged and guided me to finish this thesis. I don't think I can fully express my sincere gratitude and I am always indebted to him and I wish him health and success. I am also very grateful to the members of my thesis committee who read my thesis.
-
Fabrication and evaluation of sericin nanocarrier containing Cisplatin for the treatment of breast cancer
Kiana Bahremand 2023Abstract Breast cancer is one of the most serious threats to women's health. Currently, conventional treatment methods for cancer, such as chemotherapy and radiotherapy, often prove to be less suitable due to the side effects they induce in tissues and other organs, making them less effective. In recent years, the utilization of nanotechnology has paved the way for the design and synthesis of various nanocarriers that can specifically deliver therapeutic agents to tumor cells. Biopolymer-based nanocarriers, including protein-based nanocarriers, have gained significant attention in research due to their low toxicity, biocompatibility, biodegradability, and ability to modify their structures. Sericin, one of the major proteins in silk, consisting of 18 amino acids, possesses high biodegradability, non-toxicity to normal cells, and also exhibits a pH-charge reversal characteristic, resulting in the increased release of the therapeutic agent in the tumor microenvironment. The anti-solvent precipitation (Asp) method will be employed to prepare the sericin-based protein nanocarrier. In this method, sericin protein is initially dissolved in an organic solvent, and by slowly adding it to a non-solvent, sericin molecules undergo self-assembly to form nanocarriers. This study aims to utilize sericin silk protein-based nanocarriers for encapsulating the anticancer drug cisplatin. It is well-established that cisplatin exerts its cytotoxic properties by binding to nuclear DNA and interfering with DNA replication and transcription mechanisms. In a slightly acidic tumor condition, the surface charge of sericin undergoes a pH-driven conversion from negative to positive, demonstrating that pH can regulate surface charge. The positively charged nanocarriers in the acidic tumor environment, facilitate enhanced interaction with tumor cells due to the charge attraction between the positively charged nanocarrier and the negatively charged surface of the cancer cells.
-
Investigation of temperature and pressure effects on the oxidation process of benzimidazoles and benzothiazoles using molecular dynamics method
Farahnaz Fatahi 2022در مطالعه ديناميك مولكولي (MD)، فرآيند اكسيداسيون تركيبات مبتني بر بنزيميدازول و بنزوتيازول در دماهاي اوليه مختلف توضيح داده شده است. فرآيند اكسيداسيون در سيستم هاي اتمي تعريف شده توسط دما، انرژي پتانسيل، انرژي پيوند، انرژي برهمكنش و تعداد محاسبه پيوند بين اتمي گزارش شده است. خروجيهاي MD دما و انرژي پتانسيل سيستمهاي تعريفشده را نشان ميدهند كه پس از 10 ns به نسبت محدود همگرا شدهاند. براي شبيهسازي فرآيند تعادل در گروه NPT تحقيقاتي ما با استفاده از Nose-Hoover barostst اجرا شد. علاوه بر اين، محاسبات ما نشان مي دهد كه فرآيند اكسيداسيون با حداكثر شدت پس از 10 ns رخ مي دهد. همچنين نتايج MD نشان داد كه افزايش دماي اوليه در فرآيند اكسيداسيون تركيبات بنزيميدازول و بنزوتيازول پارامتر مهمي است و با بزرگ شدن اين پارامتر فيزيكي تا 375 كلوين، تعداد پيوندهاي بين اتمي به 1175 پيوند افزايش مييابد كه اين تغيير پيوند نشان ميدهد كه فرآيند اكسيداسيون با شدت بيشتري رخ ميدهد. .
-
Sythesis, characterization and application of Uio-66-NH3VO3 as a new heterogeneous nanocatalyst for oxidation of sulfides and oxidative coupling of thiols
Maryam Allahyari 2022 -
Investigation of thermal conductivity and physical and mechanical properties of unsaturated polyester resin containing magnetic graphene particles
Mahnaz Ahmadi mesrkhani 2022Unsaturated polyester resin is widely used in the composite industry. Addition of particles to unsaturated polyester resin improves thermal, physical-mechanical properties.The use of particles such as graphene, due to its special properties, is widely used in a variety of composites as a resisting and reinforcing agent. In this research, different particles such as graphene, graphene oxide and alumina in different weight percentages have been used to investigate the changes in thermal and physical-mechanical properties of polyunsaturated resin. According to studies, graphene, graphene oxide and alumina have had positive effects on the properties of resins.Thermal conductivity was obtained for samples with different weight percentages containing magnetic graphene oxide, magnetic graphene and alumina.The thermal conductivity of the samples in the cooked state and fully networked in different fluxes (1.024, 2.07, 3.024) watts has been investigated. It was observed that by adding a small amount of particles, the thermal conductivity increases compared to pure resin. It has also been shown that with the addition of magnetic oxide graphene, magnetic graphene and alumina, the thermal conductivity has also increased.The rate of increase in thermal conductivity varies depending on the amount of particles added to the resin. But the highest increase in thermal conductivity is related to magnetic graphene oxide 0.3%. The results obtained from DMA test showed that by adding particles to unsaturated polyester resin due to gravitational interactions between the resin surface functional group and OH functional group on the surface of magnetic graphene and magnetic graphene and thus creating a covalent bond. Strong modulus of storage increased compared to pure resin The first chapter introduces the structure of unsaturated polyester resin and the structure of the particles used and their properties.In the second chapter, according to previous studies, reports on mechanical and thermal properties are presented. Chapter 3 describes the synthesis of graphene oxide, how to convert graphene oxide to graphene, the synthesis of iron and how the particles are magnetized, as well as the tests performed. In the fourth chapter, the results of thermal test and DMA are analyzed in general.
-
Investigation of heat transfer and thermo-mechanical properties of unsaturated polyester resin containing Boehmite nanoparticles
Milad Haghighat 2022Unsaturated polyester resins have manyapplications in the composite industry. In thicker pieces made with this resin,a lot of heat is released in a short time during curing, inaddition, they have a low heat transfer coefficient. In thick sections, hightemperature differences between the center and the sample walls cause internalstresses. Therefore, adding particles with high thermal conductivity can helpto eliminate this defect. In this study, to investigate the changes in theproperties of unsaturated polyester resin containing Boehmite nanoparticles inweight percentages of 0.02, 0.05 and 0.3 and its hybrid with graphite andalumina particles in different weight percentages were used. The thermalconductivity of the samples made in heat fluxes of 1, 3 and 4 watts wasinvestigated. Also, DMA test was used to evaluate themechanical properties of the samples and the results were evaluated. Accordingto the results of thermal conductivity test, the highest rate of increase inthermal conductivity was obtained in the sample containing 0.05% by weight ofboehmite nanoparticles, which increased by 149% compared to neat resin. Also, inthe performed hybrid samples, the highest thermal conductivity coefficient isfirst related to boehmite / graphite hybrid, containing 0.025% by weightof boehmite / 0.025 graphite with thermal conductivity of 9.93 watts perkelvin and then for boehmite / alumina hybrid sample. Contains 0.05% by weightof boehmite / 0.5% by weight of alumina with a thermal conductivity of 7.45watts per kelvin, which have increased by 108% and 56%, respectively, comparedto neat resin. Also with you to the results obtained from the DMA test withincreasing the content of boehmite nanoparticles continuous storage modulusincreased. The highest increase in storage modulus was obtained in the 0.3% byweight sample of boehmite, which could be due to the stiffness and hardness ofboehmite nanoparticles. The OH groups at the particle surface can increase thestorage modulus relative to neat unsaturated polyester resin by creatinggravitational interactions with the OH, COOH and ester groups of alkyd chainsof unsaturated polyester resin. The use of boehmite / alumina particle hybridsalso led to better results than boehmite / graphite particle hybrids, due tothe fact that alumina particles have a smooth surface and spherical morphologythat reduce friction and improve mechanical properties in the system. The useof three-part boehmite / graphite / alumina hybrid in unsaturated polyesterresin increased heterogeneity and formed a non-uniform network in the systemcompared to neat resin.
-
Application of Fe3O4@BNP@SiO2-SO3H as a Magnetic Heterogeneous Nanocatalyst in the Biginelli Reaction and Synthesis of 5-Substituted 1H-tetrazoles
Farnoosh Moradi darbandjoghi 2020:This thesis consists of two section Preparation and Charactrization of Fe3O4@ S@SiO2-SO3H as an Magnetic Heterogeneous Nonocatalyst and its Application for the Synthesis of 3,4-Dihydropyrimidinones Derivatives Fe3O4@ s@SiO2-SO3H as a magnetic heterogeneous nanocatalyst was synthesized during several steps. Fe3O4@ s@SiO2-SO3H wascharacterized using FT?IR spectroscopy, XRD, TEM, SEM, EDX, TGA, VSM and Mappin . Then, it was used as a new, efficient and stable nanocatalyst in synthes 3,4-dihydropyrimidinone derivatives via reaction of aromatic aldehydes with 1,3-dicarbonyl compounds and urea or thiourea .under solvent free conditions, at 80 °C with excellent yields Synthesis of 5-Substituted 1-H-Tetrazoles with Fe3O4@ s@SiO2-SO3H as an Magnetic Heterogeneous Nanocatalyst Fe3O4@ s@SiO2-SO3H was described as a effective and stable nanocatalyst for the synthesis of 5-substituted 1H-tetrazoles using aromatic aldehydes, sodium azide and malononitrile to help a [2+3] dipolar cycloaddition reaction-Knoevenagel condensation in solvent-free conditions at 80 °C. being eco-friendly, easy procurement method, use of cheap raw materials, high yields, short times, easy separation and recyclability of the catalyst are the benefits of this method
-
Synthesis, Characterization and Application of (UiO-66-NH3)2Ce(NO3)6 as a New Heterogeneous Nanocatalyst for the Preparation of 2-Substituted Benzimidazoles, Benzothiazoles and Oxidation of Sulfides
Avesta Abdi 2020 -
Synthesis, Characterization and Application of Arginine Sulfonic Acid (Arg-SO3H) as a Green Br?nsted Acidic Ionic Liquid for the preparation of ?,?'-Bis(benzylidene)cycloalkanone compounds and 2-Substituted Benzimidazoles
Arash Ghaderi kashkamiri 2020A green and efficient arginine sulfonic acid Arg-SO3H for the synthesis of ?,?´-bis(substituted-benzylidene)cycloalkanone simple and efficient method for the synthesis of ?,?´-bis(substituted-benzylidene)cycloalkanone derivatives from cyclohexanone or cyclopentanone by the condensation of various aromatic aldehydes, using cheap and readily available Arg-SO3H as a acidic ionic liquid catalyst. This simple procedure is efficient and can be applied to the synthesis of a wide variety of ?,?´-bis(substituted benzylidene)cycloalkanone in excellent yields. Synthesis of 2-Substituted Benzimidazoles catalyzed by Arg-SO3H as a powerful bronsted acidic ionic liquid A novel efficient method for the selective synthesis of 2-substituted benzimidazoles is described through condensation reaction of o-phenylenediamines with a wide rang of aromatic aldehyde substrates using Bronsted acidic ionic liquid arginine sulfonic acid Arg-SO3H as a reusable catalyst under metal-free conditions at ambient temperature. Notably, is the efficient catalyst for good to excellent yields of the corresponding products (up to 97%). In addition, catalysts are recycled at least five times without significant loss in activity.
-
Synthesis, Characterization and Application of Magnetic Boehmite Nanoparticles in Oxidation of Sulfides, Tertiary Amines and Preparation of 2-Substituted Benzimidazoles, Benzothiazoles and 1,2-Disubstituted Benzimidazoles
Mohammad Ghanbari Kermanshahi 2019Synthesis, Characterization and Application of Magnetic Boehmite Nanoparticles
-
Synthesis, Characterization and Application of Graphene Oxide?Supported Copper Complex Nanocatalyst in Organic Reactions such as Synthesis of Nitriles and Aldehydes
2019 -
Synthesis, Characterization and Application of GO-CPTMS-Melamine-CAN as a new Heterogeneous Nanocatalyst for the Preparation of 2-Substituted Benzoimidazoles and Benzothiazoles
SAJJAD NAJAH MAHDI 2019Synthesis, Characterization and Application of GO-CPTMS-Melamine-CAN as a new Heterogeneous Nanocatalyst for the Preparation of 2-Substituted Benzoimidazoles and Benzothiazole
-
Synthesis and Characterization of Fe3O4@SiO2~Pr-NH-L-Proline/Cu(OAc)2 as a Magnetic Nanocatalyst in the Synthesis of 2-Imidazoline and ?-Phosphonomalonate Derivatives
Maryam Molaei 2018preparation of Fe3o4@Sio2~Pr-NH-L-Proline/Cu(OAc)2 as a highly efficient magnetic nanocatalyst and its application in the synthesis of B-Phosphonomalonates and 2-Imidazolines was carried out in this project .The 2-Imidazolines were prepared from nitriles and ethylenediamin .Both of reaction performed in reflux conditions. High yield of product and easy workup are some of advantages it this work.
-
Design and optimization of a new fluorometric sensor for determination of drug as ketotifen and amino acids based on carbon dots synthesized using natural materials.
Mahshid Olfati somar 2018In the first work, carbon dots from beef were used for quantitative analysis of ketotifen fumarate. Synthesized carbon dots have a strong fluorescence emission in the range of 416 nm, which were quenched fluorescence in the presence of ketotifen fumarate. The results of the analysis showed that there is a linear relationship in the range of 7 × -5× (M) and the value of 0/3 (µM) was obtained for the detection limit. This method was used to measure ketotifen fumarate in human and urine samples. Relative Standard Deviation (RSD) and Relative Error (Re) for measuring ketotifen fumarate in real samples were acceptable values. In the second work, a simple and cost effective method for spectrofluorimetric determination of cysteine in the presence of silver nanoparticles was proposed by nitrogen doped carbon dots (prepared from isoniazid) based on the carbon dots fluorescence recovery. Variables affecting the reaction such as: PH, carbon volume, silver nanoparticle volume, phosphate buffer concentration and interaction time, were studied. The determination of the cysteine with a dynamic range of 3 × -6 × (M) and the detection limit 3 ? 9 × molar done. The method was used to determination cysteine in human plasma and urine samples, and relative standard deviations and relative error were reported.In the third work, nitrogen doped carbon dots (prepared from isoniazid) were used for quantitative analysis of melamine in the presence of gold nanoparticles. The absorption spectrum of gold nanoparticles overlapping with the carbon dots emission spectrum causes the fluorescence of the carbon dots to be quenched through the inner filter effect mechanism, then fluorescence of carbon dots recovery by melamine. The amount of carbon dots fluorescence recovery in a range of 1 × -1 ×
-
Removal Thiol Compounds from Oil by Using Modified Zeolite with AgO Nano Particles
Roghaye Fatahizade 2018In this study the nano-absorbent Ag-Y zeolite was prepared by addition of AgNO3 and ion exchange method. The prepared of nano-absorbent Ag-Y zeolite was calcined at 500 ?C , 120 and heating rate of 5 ?C/min. Characteristic of ynthesized nano-absorbent Ag-Y zeolite were carried out by (SEM), (BET), (XRD) and (FT-IR). Then, the prepared nano-absorbent Ag-Y zeolite was used as an efficient absorbent for the removal of sulfur compounds especially Paratoluene thiol from crude oil. Various variables effect on the absorption and performance of nano-absorbent Ag-Y zeolite studies and optimize these variable hy in order to find the maximum amount of sulfur compounds removal. The results from this optimizatio including: weight of adsorbent dosage: 3 wt.% based on crude oil, contact time: 40 min, room temperature, weight percent of Ag: 15 wt.% based on Y zeolite weight. At end of the optimization, the efficiency of removal of Paratoluene thiol was attained to 98.1% by using nano-adsorbent Ag-Y. Also the adsorption reactio and Langmuir and Freundlich isotherms wa tudied. Absorption data is very well fitted to Langmuir isotherm model, and reaction kinetics follows the pseudo second-order kinetics
-
Application of copper (II) oxide nanoparticles impregnated on the melamine-modified UiO66-NH2 metal-organic frameworks for C-N cross-coupling reaction and synthesis of 2-substituted benzimidozole derivatives
SUSAN NAJARI 2017 -
Synthesis, Characterization and Application of ZnO@SiO2-TTIP as a Nanocatalyst in the Synthesis of Dihydropyrimidionones and 2-Substituted Benzoxazoles, Benzimidazole and Benzothiazole Derivatives.
Zahra Karami 2017In this thesis, we have designed the ZnO @ SiO2-TTIP nanocatalyst and studied its activity in the synthesis of 2-substituted benzimidazole, benzothiazole and benzoxazole derivatives as well as the synthesis of dihydropyrimidone and yielded quite good results in comparison with past wor
-
Preparation and Characterization of Mesoporous Titantania-Aluminium Oxide-TTIP as a New Nanocatalyst for the Synthesis of 2-Substituted Benzimidazole and Benzothiazole Derivatives and Oxidation of Organic Sulfides
Mohsen Bakhtiarian 2017 -
Synthesis and Characterization of Mesoporous Titania(IV) - Cerium(III) Oxide as a Novel Nanocatalyst for the Preparation of 2-Substituted Benzimidazoles and Benzothiazoles and ?-Phosphonomalonat Derivatives.
MOHAMMED SALIM MOHAMMED 2017 -
GO-SO3H as a Acidic Recyclable Heterogeneous Nanocatalyst for the Synthesis of ??-Phosphonomalonates and Tetrazole Derivatives
Fateme Amiri 2017An efficient synthesis route to?-phosphonomalonates from reaction of divergent aldehydes with malononitril and thriethylphosphite, under solvent-free conditions intheone-pot by GO-SO3H as an acidic heterogeneous nanocatalyst, a relative inexpansive, ecofriendly, easy available, non-explosion, thermally robust, recyclable and easy to handle catalyst at 60°C with excellent yields is described. Unenhanced reaction times, simple reaction protocol and work-up, have been improved synthesis of these materials in the presence of this heterogeneous nanocatalyst.GO-SO3H used to be an acidic heterogeneousnanocatalyst for the synthesis of TetrazoleDerivatives.Thesederivatives were formed from divergent aldehydes, sodium azid and malononitrilinthe one-pot which was efficiently simple and convenient.This method afforded shortreaction time, easy workup, moderate to excellent isolated yields which make this protocol practicaland economically attractive
-
Study of the interaction between HSA with Advantame ( as an artificial sweetener ) and Pioglitazone (as an antidiabetic drug )
WALEED ABD ALI AAKOOL 2017 -
Construction of electrochemical sensor based on glassy carbon electrode modified with copper nanoparticles and multiwalled carbon nanotubes for determination of 4-nitrophenol .
ALI TAHER ABDALI 2017In this thesis we report the fabrication of copper nanoparticles on the multi-walled carbon nano-tubes (MWCNTs) composite film modified glassy carbon electrode ((Cu /MWCNTs/GCE)) and it was characterized by cyclic voltammetry, a scanning electron microscope and The energy dispersive X-ray (EDX) analysis. Then it was application in the electrochemical Determination of 4-nitrophenol (4-NP) in real samples. Cyclic voltammograms displayed that (Cu /MWCNTs/GCE) showed high electrochemical catalytic activity contrasted with the MWCNT/ GCE and Cu / GCE modified. The (Cu /MWCNTs/GCE) was observed to be appropriate for the selective determination of 4-NP by square wave voltammetry (SWV). Under the optimized condition the fabricated sensor demonstrated two linear concentration ranges from 0.2 to 12.3 and 12.3 to 298.0 ?M with detection limits of 0.06 ?M (S/N = 3). It was proved that this electrode can be utilized for the measurement of (4-NP) in real samples.
-
Electrochemical study and determination of warfarin by using carbon paste electrode modified by CdxCy nanoparticles and multi wall carbon nanotubes and its applications in real samples.
RIYADH ABDULKHALEQ ABDULHAMED 2017This work is introduces a new electrochemical sensor based on cadmium carbide nanoparticles CdxCy and multi-wall carbon nanotubes MWCNTs modified carbon paste electrode (CPE) for low level detection of warfarin .The modified electrode was characterized by different methods such as electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV). The oxidation peak current of warfarin under the optimum experimental conditions was applied for its monitoring for the first time. The calibration curves were linear for warfarin concentrations from 0.009 to 1.4 µM and 1.4 to 500 ?M with a limit of detection of 1.8nM and limit of quantification of 6.6 nM using differential pulse voltammetric method (DPV). The modified electrode showed excellent stability and was used for determination of warfarin in tablet and human serum with acceptable results.
-
Application of FMNPs-TA-SO3H as an Efficient Heterogeneous Acidic Nanocatalyst for the Synthesis of Tetrazole and Xanthene Derivatives
Sandia Ghahramani 2017Application of FM -TA-SO3H as an Efficient Heterogeneous Acidic Nanocatalyst for the Synthesis of Tetrazole and Xanthene Derivatives
-
ZrOCl2/H2O2 System as anOxidizing Agent in Synthesis of Organic Compounds such as Sulfonyl Chlorides, Sulfonamides and Sulfoxides.
RAHIL CHAMANI KASIR ABADI 2017ZrOCl2/H2O2 System as an Oxidizing Agent in Synthesis of Organic Compounds such as Sulfonyl Chlorides, Sulfonamides and Sulfoxides
-
Survey of Biological Removal of Cadmium by Halomonas elongata IBRC-M10433 Under Different Environmental Conditions
Zahra Kahrarian 2016AbstractNowadays,with progress in industry the dangerous of heavy metals were increased.Cdmium is one of the most abundant toxic elements that contaminates soil, water, and food chain and represents a serious threat for human health and agricultural crops.Industrial waste water, as the most important environmental pollutants that contain significant amounts of heavy metals are high salt density. The technology of biological removal as efficient and effective method comparing to common methods to removing of heavy metals from industrial waste was improved.The biological removing method is cheap and safe for environment. Biological removal of the high toxicity of cadmium with high mobility and widespread ecological effects to be considered as an important field in the biotechnology. Detection of persist bacteria to toxic metals and using of them for removing heavy metal from arouses environments and wastewaters is very important. In this study the ability of Halomonas elongata IBRC-M10433 bacterium removed from Uroumie Salty Lake to removing of Cadmium was test.The purpose from this study was to optimization of Biological removal of Cdmium by Halomonas elongata IBRC - M10433 under environmental factors. Design of Experiments Taguchi method to determine the optimum conditions relative to environmental factors such as cadmium concentration, salt and concentration of glucose as the carbon source in biological removal of Cdmium y Halomonas elongata IBRC- M10433. This study shown that the Halomonas elongata IBRC- M10433 as potential adsorbent for heavy metal ions from aqueous solution and the highest removal of Cdmium was observed as 50 mg/L ion concentrations , 10 g/Lto carbon and 200 g/L of salt at 370C and pH7.It was also observed That concentrations of carbon is the most effective factor in the bioremediation. In addition to the experimental design Taguchi method to determine the optimum conditions, environmental factors such as concentration NH4Cl as a nitrogen source, K2HPo4 as a source of phosphorus and cadmium concentrations in biological removal of cadmium by Halomonas elongata IBRC- M10433 Optimum conditions at P 0/3 g/L, Cdmium concentration 100 mg/L and nitrogen 2 g/L at 37 ° C and pH 7. also observed That concentrations of phosphorus is the most effective factor in the bioremediation. Results from this study shown that Halomonas elongata IBRC-M10433 persist to Cadmium metal,And has the ability to removal of Cdmium containing industry waste water and aqueous solution .The bacteria can be used for further studies in the field of removal of heavy metals.Application of biotechnology and life is very valuable for the treatment of heavy metals.With the help of modern technology can be used to identify genetic changes in microorganisms and make payment And an important step in improving perceptions of environmental pollution.Keyword:heavymetal,biologicalremoval,Taguchimethod, Cadmium, Halomonas elongata IBRC - M10433.
-
Synthesis, Characterization and Application of Graphene Palladium Porphyrin as a Nanocatalyst for the Coupling Reactions such as: Suzuki-Miyaura and Mizoroki-Heck Reactions
Sohaila Nakhjiri kamrani 2016In this thesis palladium porphyrin nanocatalyst was synthesized on the graphene oxide 3-(cholopropyl)- trimethoxysilane. This nanocatalyst has features like: producing reaction at temperatures less than 100°C, asymmetric production, easy operation, conversion and high interest rates, catalyst comfortable recovery, high speed reaction and high selectivity. This nanocatalyst specially was used in Suzuki-Miyaura, Mizoroki-Heck coupling reactions and C-O cross-couplings of phenols with aryl iodides. In this thesis we used porphyrin palladium complex immobilized on graphene oxide in the cross-coupling reactions such as:Suzuki-Miyaura, Mizoroki-Heck and C-O cross-couplings. In this thesis palladium porphyrin nanocatalyst was synthesized on the graphene oxide 3-(cholopropyl)- trimethoxysilane. This nanocatalyst has features like: producing reaction at temperatures less than 100°C, asymmetric production, easy operation, conversion and high interest rates, catalyst comfortable recovery, high speed reaction and high selectivity. This nanocatalyst specially was used in Suzuki-Miyaura, Mizoroki-Heck coupling reactions and C-O cross-couplings of phenols with aryl iodides. In this thesis we used porphyrin palladium complex immobilized on graphene oxide in the cross-coupling reactions such as:Suzuki-Miyaura, Mizoroki-Heck and C-O cross-couplings. In this thesis palladium porphyrin nanocatalyst was synthesized on the graphene oxide 3-(cholopropyl)- trimethoxysilane. This nanocatalyst has features like: producing reaction at temperatures less than 100°C, asymmetric production, easy operation, conversion and high interest rates, catalyst comfortable recovery, high speed reaction and high selectivity. This nanocatalyst specially was used in Suzuki-Miyaura, Mizoroki-Heck coupling reactions and C-O cross-couplings of phenols with aryl iodides. In this thesis we used porphyrin palladium complex immobilized on graphene oxide in the cross-coupling reactions such as:Suzuki-Miyaura, Mizoroki-Heck and C-O cross-couplings.
-
Sulfated Graphen Oxide (GO-OSO3H) as an Acidic Heterogenous Nonocatalyst for the Synthesis of Dihidropyrimidones and 1,2-Disubstituted Benzimidazoles.
Zeynab Moradi khoshinani 2016An efficient synthesis route to 1,4-dihydropyrimidine derivatives from reaction of divergent aldehydes with diketone, diester and urea, thiourea under solvent-free conditions in the one-pot by GO-OSO3H as an acidic heterogeneous nanocatalyst, a relative in expansive, eco-friendly, easy available, non-explosion, thermally robust, recyclable and easy to handle catalyst at 90 °C with excellent yields is described. GO-OSO3H used to be an acidic heterogeneous nanocatalyst for the synthesis of 2-aryl-1-arylmethyl-1H-benzimidazoles. These derivatives were formed from o-phenylenediamine and aromatic aldehydes in the one-pot which was efficiently simple and convenient.
-
Utilization BNPs-SO3H as a Acidic Hetrogeneous Nanocatalyst in the Synthesis of Porphyrin Derivatives and Theoretical Study on Physicochemical Propertiese of these Derivatives
Reza Jamshid Beigi 2016 -
Preparation and Characterization of MWCNTs-TA-SO3H and MNPs-TA-SO3H as Bronsted Acidic Heterogeneous Nanocatalysts and their Application for the Sulfoxide and Xanthene Derivatives
Fereshteh Jalilian 2016 -
Preparation and Characterization of BNPS –SO3H As a New Acidic Nanocatalyst for the Synthesis of Sulfoxides and Dihydropyrimidines
2015 -
Extraction and Characterization of Allium iranicum Plant Extract and its Application in the Green Synthesis of Silver Nanoparticles and Oxidation of Thiocarbonyl Compounds
2015 -
Synthesis of 5-Amino-3-aryl-3H-1,2-dioxole-4-carboxamide Derivatives and 5-Aryl-2,6-dicyano-3-methylanilines using Ionic Exchanger Resin Catalyst and Synthesis of Bis-spiro Piperidine Derivatives in The Presence of Acidic Ionic Liquid
2014 -
Synthesis of Pyrazole and Tetrahydrobenzo[a]Xanthen-11-one Derivatives in the Presence of Acidic Ionic Liquid and Nano Acidic Catalyst and Synthesis of Pyrano[2,3-c]pyrazol-6-one Derivatives Using Ionic Exchanger Resin Catalyst
2013 -
Preparation, Characterization and Application of Nanoparticle Mesoporous Activated Carbon and Sulfonated Porous Carbon in Organic Synthesis Such as : Polyhydroquinoline Synthesis, Benzimidazole Synthesis and Benzothiazoles Synthesis
Abbas Hemmati 2013 -
Synthesis of perimidines and Hexahydropyrimidines in the peresent if Acidic lonic Liqid and synthesis of Dihyropyrimidinones with Acidic Nanocomposit
Sepide Saleh 2013 -
Synthesis of Heterocyclic Compounds and ?- amino ketones in the Acidic Ionic Liquid and Knoevenagel Reaction In the Presence of Basic Nanocatalyst
Masome Mohammadi 2013 -
Application of acidic ionic liquid in organic reactions such as Knoevenagel condensation, acetylationand aldol condensation
Nasrin Babajani 2013 -
functionalization of multiwall carbon nanotubes and its applications in organic synthesis
Mohsen Rostaei 2011 -
Application ofH2O2-PoCl3 and h2O2-TiCl4 systems for deprotection of thiocarbonyls and thioacetals and the use of TAPCfor the oxidative coupling of thiols to disolfides
Vida Shakibaian 2011 -
synthesis of sulfides from alcohols and thiols in solvent -free conditions and deoxygenation of sulfoxides
Nayereh Khodadoustan 2011 -
synthesis opf sulfony chlorides and sulfonamides with H2O2 in the precence cyanuric chlorid or TiCl4
DONYA KHALEDIAN 2011 -
oxidation of sulfides to sulfones and deoxygenation of sulfoxides and synthesis of thioethers
Samira Sohrabnezhad 2011 -
Deprotection of sulfur compounds such as thiocarbonyls and thioacetals and protection of aldehydes and ketones
Maryam Tajik 2010 -
application of h2 O2 -lewis acid in organic synthesis
MEHDI SHEYKHARABI 2010 -
preparation of imidazole and benzimidazole and its derivatives
Akbar Nejati 2010 -
preparation of sulfony chlorides and its derivatives
Mehdi Soheili zad 2009 -
synthesis of tetrahydroyran and 3,4-dihydropyrimidin -2(1H)-ones and conversion of thiocarbonyl to carbonyl compounds
2009 -
Synthesis of heterocyclic compounds with more than 6- membered ring
Zohreh Nazarian 2009 -
اكسيداسيون گروهاي عاملي تركيبات آلي به وسيله CRO3 ساپرت شده بر روي پليمر در حضور zRCL4
2007 -
Synthesis of imidazole derivatives
2006 -
Application of hydrogen sulphates organic reactions
2006 -
Application of H2O2 pph3/Br2/Cucl and ZrCl4 in oxidation,Reducation and Crossd- Aldol Condensation Reactions Respectively
2006 -
Apphication of silica acid in organic synthesis
2006 -
Application of CAN as an oxidant and nitrating againt in organic reactions
2006
