profile - Razi University

Faculty Member of Razi University

Razi University
Mohammad bagher GHolivand

Mohammad bagher GHolivand

Professor / Department of Chemistry / Analytical Chemistry

Current courses

Course Name unit term
Analytical chemistry Laboratory 2 2 first semester Academic year 2026-2027
chime 3 first semester Academic year 2026-2027
3 first semester Academic year 2026-2027

Master Theses

  1. New fabrication strategies for construction of catalysts based on Metal-Organic frame works derivatives for water splitting.
    Hadis Malekain 2024
      In chapter 1, the growing consumption of conventional fossil fuels and accompanying environmental contamination are affecting global society on an unprecedented scale. Consequently, thereis a quite imminent need to fundamentally adjust the world energy landscape and build clean, low-carbon, safe, and efficient modern energy systems. As an ideal clean chemical fuel with superb gravimetric energy density and energy conversion efficiency, hydrogen energy is expected to be an excellent candidate to replace traditional fossil fuels. Electrochemical water splitting is considered to-be one of the most promising hydrogen production technologies, and it can utilize electricity generated via renewable energy sources, such as solar energy, wind power, geothermal energy, and bioenergy, to form a closed loop of renewable energy. Unfortunately, the large-scale commercial application of electrochemical water splitting is subject to the following three restrictions: (i) a larger overpotential than the theoretical value (1.23 V) needed to drive overall water splitting; (ii) the poor stability of electrode materials; and (iii) high cost caused by the scarcity of noble-metal electrocatalysts. To date, the benchmark electro catalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are Pt-group- and Ru/Ir-based noble metal materials with small overpotentials and low Tafel slopes. These noble metals can suffer from dissolution, agglomeration, and poor durability during the water splitting process. The design of electrocatalysts with high electrocatalytic activity is of great importance to reduce the overpotential and improve the efficiency of water decomposition.   
  2. Development of electrochemical sensors based on anion doped transition metal compounds for detection widely used drug Naproxen.
    Toloea Mahjuri 2023
       In recent years, electrochemical methods with the help of modified electrodes have become widely popular as simple, cheap, and accurate methods with high sensitivity in measuring drugs. This thesis presents the development, electrochemical characterization, and analytical application studies of two voltammetric sensors developed for the widely used drug Naproxen (NAP). In this thesis, low-cost electrode modifiers developed from anion-doped transition metal compounds and their composites with carbon nanotubes have been investigated. The thesis is divided into three chapters.
  3. Preparation of nanocomposites based on heteroatom doped metal-organic framework anchored metal nanowires for hydrogen evolution reaction and water splitting.
    Sara Bagheri 2023
      Electrochemical water-splitting technology for producing “green hydrogen” has attracted increasing attention to the global mission to replace fossil fuel-based energy sources and reduce CO2 emissions. Briefly, an introduction to water electrolysis and a review of effective catalysts are presented in chapter 1. In Chapter 2, we adopted zeolitic imidazolate frameworks-8 (ZIF-8) as the precursor to fabricate ZnS-MOF via facile sulfidation processes. The ZnS-MOF nanostructures were anchored on the surface of the nickel nanowire (denoted as Ni NW@ZnS-MOF nanohybrids) and their catalytic activity for HER, OER, and overall water splitting were studied. The prepared Ni NW@ZnS-MOF revealed a low overpotentials value of 90 and 260 mV at 10 mA cm?2 for HER and OER in 1.0 M KOH solution, respectively. The alkaline electrolyzer assembled by Ni NW@ZnS-MOF provides a low cell voltage of 1.61 V at 10 mA cm?2 current density to boost the overall water splitting and robust stability for 15 h. The superior electrocatalytic activity of Ni NW@ZnS-MOF is due to the facile and effective electron transfer of Ni NW, accessible active sites of ZnS-MOF, and as well as the synergistic effect of the hybrid structures. This finding provides a synthesis strategy to fabricate an efficient free-noble metal catalyst for energy conversion and storage. Achieving the rational design of nanostructures for efficient oxygen evolution reaction (OER) is crucial for green energy utilization. Chapter 3 synthesized the ZnxFe3-xS4 hollow spheres derived from ZnFe-zeolitic imidazolate frameworks (ZnFe-ZIFs) through solvothermal sulfidation with superior OER activity and stability. The ZnxFe3-xS4 electrocatalyst delivers superior OER activity: it requires only low overpotentials of 235 and 285 mV to achieve current densities of 10 and 50 mA cm?2, respectively, as well as a small Tafel slope of 72 mV dec?1. In an alkaline solution, the hollow ZnxFe3-xS4 nanospheres exhibit exceptional durability in the multi-step chronoamperometry test for 20 h. This work offers a blueprint for the design and synthesis of stateof- the-art sulfide-based OER catalysts.
  4. Synthesis of transition metal (Ni, Cu) sulfides nanocomposites for electrocatalytic oxidation of methanol.
    Zohreh Mardanipaiervandi 2022
    Chapter 1: In this chapter, we briefly review direct methanol fuel cells and the most effective anode catalysts for methanol oxidation. Chapter 2: The lack of low-cost, environmental friendly and efficient electrocatalysts for methanol oxidation in DMFCs has restricted its industrialization; thus, the suggestion of a suitable electrocatalyst can be helpful to solve this problem. Herein microsphere-like the flower of undoped CuS and doped with different percentages of nickel was examined as electrocatalysts for methanol oxidation in alkaline media. The obtained results from different electrochemical measurements including cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and chronoamperometry showed that the secondary metal doping (in here Nickel), has an egregious effect in electrocatalytic activity improvement. In comparison with undoped CuS and other percentages doped of nickel in CuS (3, 10%), the oxidation current density of methanol was increased on 5% Ni-doped CuS (j~ 140mAcm-2 in 1M methanol); in addition, the electrocatalyst with this percent of nickel (5%) was indicated the lower onset potential than the other electrocatalysts. The good current density and also, the excellent stability (during 6000s) of this electrocatalyst made us to further its investigation toward methanol oxidation reaction (MOR). Chapter 3: A composed structure of MnO2 and (Ni-Cu) sulfide nanospheres as an efficient electrocatalyst for methanol oxidation reaction in alkaline media (0.5M KOH) is suggested here. A simple hydrothermal method was used for the preparation of both (Ni-Cu) sulfide and (Ni-Cu) sulfide/MnO2 electrocatalysts. The final electrocatalyst ((Ni-Cu) sulfide/MnO2) was investigated by different methods, such as X-ray diffraction (XRD), energy-dispersive X-ray spectroscopies (EDX), and field emission scanning electron microscopy (FESEM). The electrocatalytic behavior of (Ni-Cu) sulfide nanospheres and (Ni-Cu) sulfide/MnO2 composite toward MOR was examined by different electrochemical measurements including cyclic voltammetry, electrochemical impedance Spectroscopy, and chronoamperometry. The outcome indicated that the (Ni-Cu) sulfide/MnO2 composite relative to (Ni-Cu) sulfide had lower onset potential toward MOR ,and it showed the higher stability (for 6000s). The MnO2 fabrication on bimetal sulfide of (Ni-Cu) is the responsible for enhancement in the electrocatalytic properties of the proposed composite. It seems that the present work has been able to show the performance of MnO2 as a component of a composite in the manufacture of effective catalysts for methanol oxidation.  
  5. Application of nanoparticles in the electrochemical response of Salmonella and cocaine aptasensors
    Sajad Azizibozhani 2020
    امروزه رسيدن به پاسخ در زمان بسيار كم و در محيط مورد نظر از اهميت الاي برخوردار است. سنسورها اين ويژگي را دارند. كه در زمان بسيار كوتاه و در محيط مورد نظر پاسخ لازم را بدهند. علم شيمي نيز مانند ديگر علوم در سيطره سنسورها قرا گرفته است. اين سنسور ها در شيمي انواع مختلفي دارند كه همه آن ها در يك ويژگي مشترك هستن وآن پيگيري تغيرات ويژگي مورد بررسي است. نوعي خاصي از سنسورهاي شيمي كه تغيرات خواص الكتريكي گونه مورد پيگيري   را دنبال ميكند را سنسورهاي الكتروشيميايي مينامند. سنسورهاي الكتروشيميايي داراي ساختاري ساده براي اندازه گيري گونه هاي مختلف مثل يونها،مولكول ها،آلوادگي هاو داروها   مثل ديكلوفناك و...استفاده مي شوند. انچه اهميت دارد طراحي يك سنسورمناسب براي گونه مورد نظر است .اين كار با كمك نانوذرات مختلف براي افزايش سيگنال الكتريكي و همچنين گزينش پذير كردن سيگنال گونه مورد نظر استفاده مي شود. ما در اين ساختارها از نانوذرات كربني براي افزايش سطح و همچنين افزايش سيگنال الكتريكي استفاده كرديم. از كاربرد ديگر نانوذرات اين است كه مي توانند به عنوان يك اتصال دهنده مانند كوانتوم دات ها استفاده شوند. اگر درساختاار سنسورها از يك جز زيستي استفاده شود به آن ها بايوسنسورگفتتهه مي شود و اگر اين جز يك رشته اي DNAباشد ان را اپتاسنسور((aptasensorگويند.براي اندازه گيري كوكايين و سالمونلا دو اپتاسنسور الكتروشيميايي طراحي شد. اين اپتاسنسور داراي حساسيت بالاو گزينش پذيري در تشخيص كوكايين و سالمونلا بودند. در اين كار از الكترود ITO  استفاد شد براي افزايش سطح و همچنين تثبيت كوالانسي رشته اي DNA  سطح الكترود را باكمك روش تبخير گرمايي توسط طلا اصلاح كرديم. در نيتيجه اين كار و با تغيرات غلطت گونه جريان ثبت شده تغغير مي كند با ايجاد منحني كاليبراسيون پي به غلظت گونه در نمونه هاي مورد بررسي شديم. همچنين گزينش پذيري اپتاسنسور را در حضور گونه هاي مشابه بررسي كرديم و نتايج حاصل نشان دهنده كارايي بالا اپتاسنسور هاي طراحي شده بود.  
  6. Water and soil corrosivity potential under different climate conditions, Kermanshah province
    Zahra Eskandari 2019
    Abstract Water is one of the challenges of the present century, that can be the source of many developments in the world . Regarding the importantance of these resources and considering this matter that our country is >Keywords: climate zones, water corrosion and scaling potential, orrosion indices, soil corrosion potential, speciation ion   
  7. Electrochemical study and determination of warfarin by using carbon paste electrode modified by CdxCy nanoparticles and multi wall carbon nanotubes and its applications in real samples.
    RIYADH ABDULKHALEQ ABDULHAMED 2017
      This work is introduces a new electrochemical sensor based on cadmium carbide nanoparticles CdxCy and multi-wall carbon nanotubes MWCNTs modified carbon paste electrode (CPE) for low   level detection of warfarin .The modified electrode was characterized by different methods such as electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV). The oxidation peak current of warfarin under the optimum experimental conditions was applied for its monitoring for the first time. The calibration curves were linear for warfarin concentrations from 0.009 to 1.4 µM and 1.4 to 500 ?M with a limit of detection of 1.8nM and limit of quantification of 6.6 nM using   differential pulse voltammetric method (DPV). The modified electrode showed excellent stability and was used for determination of warfarin in tablet and human serum with acceptable results.
  8. Electrochemical application of carbon nanoparticles and beta cyclodextrin hybrid nanocomposite construction of drug sensors.
    Parva Emambakhshi pordanjani 2016
  9. fabrication of electrochemical sensors based on nano particles for electrochemical detection of trazodone
    Zahra Goudini 2016
  10. stripping voltammetry determination of Uranium(VI) and fungicide pesticides (Tridemorph) using oxide nanoparticles modified electrode.
    Roghaye Azizi yangijai 2016
  11. an environmentally friendly electrochemical method for synthesis of pyrazole derivatives and electrocatalytic determination of sumatriptan in the presence of ibuprofen on the surface of carbon paste electrode modified with a composite of copper.terpolymer complex and copper nanoparticles
    SEYED SASAN RADFAR 2015
  12. simultaneous determination of binery and ternary drugs by modified carbon paste electrodes based on nanoparticles
    2015
  13. Determination of antiviral drugs (valacyclovir & Lamivudine) using modified electrodes by graphene oxide&graphene sheet and cobalt oxide nanoparticle-based nanocomposite
    2014
  14. electropolymerization of graphene-poly [p-aminophenol] nanocomposite for simultaneous determination of ascorbic acid.epinephrine and uric acid and highly sensitive voltammetric determination of efavirenz using carbon paste electrode modified with titanium dioxide boehmite nanocomposite
    Sara Moradi 2013
  15. Simultaneous determination of epinephrine and uric acid at a glassy carbon electrode modified by graphene and Detection of copper ion in the present of minoxidil using stripping voltammetric method
    Ilnaz Yavari 2012
  16. Determination of Olanzapine and Thiourea Using Electrodes Modified by DNA and film of Copper- Cobalt Hexacyanoferrate and Investigation of som catechol Derivatives in the Presence of 4-Phenyl Semicarbazid
    Salman Darabi 2011
  17. Determination of tetracycline at a UV-irradiated DNA film modified glassy carbon electrode
    Hamzeh Khani 2011
  18. Preparation of molecular imprinted polymer for extraction & determination of pharmaceutical compounds & herbicides by electrochemical methods
    Nashmil Karimian 2011
  19. Preparation of Molecular Imprited Polymer for Extraction and Determination of Pharmaceutical Compounds and Herbicides by Electrochemical Methods
    Maryam Torkashvand 2011
  20. Application and construction of carbon paste modified electrodes developed for determination of metal ions some real samples
    Behrooz Gravandi 2011
  21. construction of carbon paste modified electrodes developed for determination of metal ions some real samplrs
    Mohammad Hdi Parvin 2010
  22. Electrochemical Behavior and Determination of Zonisamide and Tacrolimus in Pharmaceutical Formulations and Biological Samples
    2009
  23. Electerochemical behavior and drtermination of drugs in pharmacetical formulation and biological samples.
    2009
  24. Synthesis of Moleculary Imprinted Polymer Selective of Fluvoxamine, Study of its Binding Characteristics in Aqua Medium and its Application on Screen Fluvoxamine in Human Serum.
    2009
  25. Preparation and Characterization of Electrochemical Sensors and Their Application in-1 Pharmaceutical Samples.
    2008
  26. determination of trace amount of zinc by adsorptive cathodic stripping voltammetry with nalidixic acid as a chelating agent 2. adsorptive cathodic striping voltammetry determination of trace amount of lead by with L-3-(3. 4- DIHYDROXY PHENYL ) ALANIN L-3-(3. 4- DIHYDROXY PHENYL ) ALANIN
    2007
  27. application of analytical methods for determination of trace amounts of vanadium (V) and lead (II) BY CATALYTIC voltamentry and adsorptive stripping voltammentry
    2007
  28. the investingation of electro-oxidation of methoxy catechol in the presence of twoo-acetyl butyrolactone as nucleophile in aqueous solution
    2007
  29. Potentiometeric Study of Binary Complexes of Triethylenetetraminehexaacetic Acid with Co2+ Cd2+ and Pb2+ Ions in Aqueous Solutions
    2005
  30. A Novel Copper Selective Optical Chemical Sensor Based on N, N -bis( Salycili Dene) -1, 2- Phenylenediamin
    2005
  31. Electro- Oxidation of Catechol and its derivatives in the Presence of 2-acetyl Butirolactone in order to Synthesis some New Derivatives of Catechol
    2005
  32. Simultaneous Kinetic Spectrophotometric Determination of Periodate and Iodate and Determinartion of Acidity Constants of Fluorescein in Presence of Surfactants and in Ethanol- Water Mixtures by Chemometrics Methods
    2004
  33. construction of chemical and optical ion selective sensors for determination of various metal ions in real samples
    2004
  34. Novel Potentiometric Mebrance Sensor for Selective Determination of Chromium3 ions Based on Oxalic Acidbis (Cyclohexylidenehydrazide) ligand
    2004
  35. Novel Potentiometric Membrane Sensor for Selective Determination of Aluminum3 Ions Based on Nioxim Ligand
    2003
  36. Novel Potetiometric Membrance Sensor for Selective Determination of Chromium3 ions Based on Oxalic Acidbis ( Cycloheylidenehydrazide) Ligand
    2003
  37. simultaneous spectrophotometric determination of trales amount of Col, Ni and Cu by partial lcast squares offer of their - 2- amino cyclopentane-1- carboxylate onmicrocrystals
    2002
  38. اندازه گيري موليبدنيوم با روش اسپكتروفتومتري به وسيله هيدروكسي نفتول بلو در محيط ابي
    2001
  39. Extraction and spectrophotometric determination of trade amount of pd with 2, 2 di thio di anilin
    2001
  40. تغليظ مقادير ناچيز پالاديوم بر روي جاذب 1و5 دي فنيل كربازول - نفتالين و تعيين آن به روش اسپكترومتري جذب اتمي. تغليظ همزمان مقادير ناچيز پالاديم و مس با جذب كمپلكسهاي 1و 5 دي فنيل كربازول آنه بر روي جاذب آلومينا -sds و تعيين مقادير آنه به روش اسپكترومتري جذب اتمي
    2000
  41. the study of complexation reaction of some transition, alkaline- earth and rare earth metal ions with PAN and ALC by spectrophotometric and polarographic methods
    1999
  42. determination and separation of 2- amino cyclopentane dithio carboxylic acid by D.P.P and CSV
    1998
  43. Thermodynamic study of complexation between La and Ca with alzarin complexon in different solvents
    1997
  44. a potentiometric study of protonation and complex formation of xylenol orange with alkaline earth and aluminum ions
    1995

Update: 2026-11-18

افراد توان خواه
رنگ متن
رنگ پس زمینه
اندازه فونت
+ A -
پنهان سازی تصاویر
تنظیم کنتراست
فاصله بین کلمات
خط راهنما
فاصله بین خطوط
نوع فونت
بزرگنمایی انداره صفحه
+ -
توقف انیمیشن ها