profile - Razi University

Faculty Member of Razi University

Razi University
Fahimeh Jalali

Fahimeh Jalali

Professor / Department of Chemistry / Analytical Chemistry

Current courses

Course Name unit term
3 first semester Academic year 2026-2027
mabahs 3 first semester Academic year 2026-2027
3 first semester Academic year 2026-2027

Master Theses

  1. Sulfidation of Cerium metal-organic framework on Nickel Foam: Application as an Efficient Electrocatalyst for Methanol, Ethanol and Urea oxidation in a Water Electrolysis Cell
    Zahra Rostami ahmadvandi 2026
    The global energy crisis and the environmental consequences arising from the extensive consumption of fossil fuels have made the development of clean and sustainable energy technologies one of the most critical research priorities. In this context, hydrogen, as a clean energy carrier with high energy density and zero carbon emissions, has attracted considerable attention. However, conventional water electrolysis faces significant limitations in terms of energy consumption due to the sluggish kinetics of the oxygen evolution reaction (OER) and the requirement for high operating voltages. One effective strategy to reduce energy consumption in electrolysis is the replacement of OER with the oxidation of small organic molecules such as methanol, ethanol, and urea. These reactions not only exhibit faster kinetics and lower thermodynamic potentials but also enable the simultaneous production of hydrogen and value-added chemical transformations. In this regard, the design of bifunctional electrocatalysts with high activity, good stability, and low cost is of particular importance. In this study, a porous bifunctional electrocatalyst, CeS?@Ni?S?–NiS/NF, was successfully synthesized via the growth of a cerium-based metal–organic framework (Ce-MOF) on nickel foam followed by a sulfidation process. Initially, the Ce-MOF structure was directly grown on the surface of nickel foam at room temperature, and subsequently converted into the sulfide structure CeS?@Ni?S?–NiS/NF through a hydrothermal process in the presence of thioacetamide. X-ray diffraction (XRD) analysis confirmed the successful formation of CeS?, Ni?S?, and NiS phases. Field-emission scanning electron microscopy (FE-SEM) images revealed that the final structure possessed a layered, porous morphology composed of interconnected nanostructures, providing a high specific surface area. Energy-dispersive X-ray spectroscopy (EDS) and elemental mapping analyses confirmed the presence and uniform distribution of Ce, Ni, and S elements throughout the structure, indicating the successful formation of the sulfide nanocomposite. To evaluate the electrochemical performance of the synthesized electrode, cyclic voltammetry (CV), linear sweep voltammetry (LSV), electrochemical impedance spectroscopy (EIS), and electrochemical active surface area (ECSA) measurements were conducted in alkaline media. The results demonstrated that the CeS?@Ni?S?–NiS/NF electrode exhibited significantly superior electrocatalytic activity compared to the control electrodes, including bare NF, Ni?S?–NiS/NF, Ce-MOF/NF, and MOF-free Ce–Ni–S/NF. The enhanced performance was attributed to the increased electrochemically active surface area, reduced charge transfer resistance, and improved reaction kinetics, arising from the synergistic interaction between cerium and nickel sulfides. Furthermore, the porous MOF-derived structure facilitated electrolyte diffusion and increased the number of accessible active sites.
  2. Preparation and application of nanocomposites based on nickel in urea-assisted urea electrolysis
    FATEMEH SALARVAND 2025
    Urea-assisted water electrolysis in an alkaline environment effectively treats urine-rich wastewater and prevents the release of ammonia gas and nitrate pollution into groundwater and drinking water; these contaminants typically result from the discharge of untreated urea into rivers and lakes. On the other hand, Urea-assisted water electrolysis is an efficient method for electrochemically producing hydrogen from water, while simultaneously cleans urea-polluted water. During this process, urea is oxidized at the anode to produce N? and CO?, while pure hydrogen is produced at the cathode and can be easily collected as a valuable green fuel. Compared to conventional water splitting, this method requires 70% less thermodynamic energy to produce H?. Expanding this technology to industrial applications, such as treatment of wastewater plants and farms, could prevent health problems and costs associated with toxic gas emissions, and contribute to the emerging hydrogen economy. In this thesis, two nickel-based bifunctional catalysts were synthesized, and their feasibility for use in the urea oxidation reaction (UOR) and hydrogen evolution reaction (HER) was investigated due to their superior electrocatalytic performance. In Chapter 1, an introduction to Urea-assisted water electrolysis and its importance is provided. In Chapter 2, a cerium-nickel bimetallic metal-organic framework (NiCe-MOF) was synthesized on nickel foam (NF) via a solvothermal method to enhance its conductivity and electrochemical properties. The prepared nanocomposite was characterized using various techniques, including X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), and Field emission scanning electron microscope (FESEM). The structure of NiCe-MOF/NF was thereby determined. The electrocatalytic performance of the modified electrode toward UOR in an alkaline solution containing 0.5 M urea was evaluated using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and other electrochemical methods. Compared to stepwise-modified electrodes, the urea oxidation current on NiCe-MOF/NF was substantially increased and exhibited high stability after 200 potential cycles between 0.0 and +0.8 V. Furthermore, chronopotentiometry (CP) performed at a constant current density of 20 mA cm?² showed a very small potential drop for NiCe-MOF/NF over 20 h, confirming its excellent stability. On the other hand, linear sweep voltammetry (LSV) studies showed excellent electrocatalytic performance towards HER (in KOH, 1 M), with an overpotential of 145 mV at a current density of 10 mA cm?². Furthermore, CP stability tests demonstrated good stability of the proposed catalyst during 20 h of HER operation. The fabricated two-electrode cell, consisting of (-)NiCe-MOF/NF?NiCe-MOF/NF(+), required only 2.22 V to reach a current density of 100 mA cm?² and exhibited excellent stability, with just a slight voltage drop after 20 h of Urea-assisted water electrolysis. The superior electrochemical performance toward urea oxidation and hydrogen evolution was attributed to the effective synergy between nickel and cerium within the MOF structure. In Chapter 3, a chalcogenide was employed in the preparation of an efficient bifunctional electrocatalyst for H2
  3. Preparation of new electrochemical sensors based on zirconium oxide-porous carbon derived from metal-organic frameworks and reduced graphene oxide: application to determination of ascorbic acid, dopamine and uric acid.
    HOSNA CHERAGHI 2022
       Electrochemical sensors are known for their numerous advantages such as simplicity, low cost, high selectivity and high sensitivity. Hence, they have become powerful tools direction measuring various samples including foodstuffs, environment, disease diagnosis, medical surveys and security systems. Electrochemical sensors are >     In the first chapter of this section, a brief introduction of sensor and its types, voltammetric techniques, chemically modified electrode, materials used for electrode correction, check of studied analytes and research history is provided.    In the second chapter, a sensitive and selective voltammetric sensor which based on glassy carbon electrode modified with zirconium oxide-porous carbon/reduced graphene oxide (rGO) nanocomposite for the detection of ascorbic acid (AA) is presented. The platform was obtained by calcination of a metal-organic framework (MOF) attached to graphene oxide. Different methods were used for surface characterization. The electrochemical behavior of prepared electrode for the determination of ascorbic acid was systematically investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). Compared with the bare glassy carbon electrode (GCE), ZrO2-PCs/rGO/GCE exhibits much higher electrocatalytic activities toward the oxidation of ascorbic acid (AA) with increasing of peak currents and decreasing of oxidation overpotentials. Under optimum conditions, the modified electrode exhibits linear response to ascorbic acid in the range 1.49×10-1-9.8×10+3?M, with detection limit (S/N = 3) calculated to be 5.2×10-2 ?M. The electrochemical sensor presented the advantages of high selectivity, excellent reproducibility (RSD %= 0.379%) and repeatability (RSD %= 0.162%) and long-term storage stability. In addition to this ZrO2-PCs/rGO/GCE sensor was practically applied for the routine analysis of AA in various food and pharmaceutical samples. In the third chapter, by the method of carbonization of a metal-organic framework (MOF), porous carbon nanocomposite containing zirconium oxide (ZrO2-PCs) was prepared, which was proposed for the simultaneous determination of ascorbic acid (AA), dopamine (DA) and uric acid (UA). The morphology and structure of ZrO2-PCs obtained was characterized by different methods. In addition, the electrode modified with nanocomposite was studied by various electrochemical methods, i.e., cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) to investigate the electrochemical behavior. ZrO2-PCs/GCE showed high selectivity and excellent electrocatalytic activity to discriminate the three biomolecules. At the optimized conditions, wide linear range 1×100-6×10+3, 5×10-1-2.21×10+2, and 5×10-1-2.71×10+2µM of towards AA, DA, and UA in ternary mixture were observed, respectively. The modified electrode offers superior anti-interference capability, good repeatability (RSD %= 2 AA, 2.22 DA, 4.71UA) and reproducibility (RSD %= 2.59 AA, 4.48 DA, 1.37UA) and long-term stability. In addition, ZrO2-PCs/GCE was successfully used for the simultaneous measurement of AA, DA and UA in real samples.
  4. Preparation and application of a nanocomposite based on metal_organic framework with metal nanoparticles and carbon nanomaterial for use in high performance electrochemical supercapacitors
    Yeganeh Abbasi 2022
  5. Construction of sensor and aptasensor for progesterone analysis by using nanocomposites containing carbon nanotubes, gold nanoparticles and conductive polymers: Application to electroanalysis of biological and pharmaceutical samples
    Parisa Naderi 2020
       اين پايان نامه حاوي دو پروژه تحقيقاتي مي باشد كه چكيده آن ها در زير آورده شده است:    در بخش اول اين پايان نامه،الكترود كربني شيشه اي با نانولوله هاي كربني چند ديواره ، نانوذرات طلا وپليمر اسيدآمينه سرين   اصلاح شد. مطالعه الكترود اصلاح شده توسط روش ميكروسكوپي الكتروني روبشي FESEM ، EDS ، ولتامتري چرخه اي و طيف سنجي امپدانس الكتروشيميايي وجود يك نانوكامپوزيت رسانا بر روي سطح الكترود را نشان داد. در حضور پروژسترون ، يك پيك اكسيداسيون مشخص به دست آمد كه در پتانسيلهاي كمتري نسبت به الكترود اصلاح نشده ظاهر شد. تركيبات الكترود و شرايط آزمايشگاهي براي تعيين حساس پروژسترون بهينه شدند. يك منحني كاليبراسيون خطي در گستره غلظتي(Mµ0.001-2.0 ياng/ml 0.31 - 636) و حد تشخيص   nM0.2 ( ng/ml0.063) بر اساس( S / N = 3) بدست آمد. تكرارپذيري روش با انجام 6   اندازه گيري تكراري از پروژسترون (1) بر حسب انحراف استاندارد نسبي %RSD   ... محاسبه گرديد. تكثير پذيري روش با تهيه ... الكترد با روش مشابه و اندازه گيري پروژسترون (...مولار) بر حسب %RSD بدست آمد. الكترود اصلاح شده ،در تعيين پروژسترون در نمونه هاي سرم خون انسان و نيز در فرآورده دارويي (آمپول) با موفقيت به كار رفت.       در بخش دوم، يك آپتا حسگر براي اندازه گيري حساس و گزينشي پروژسترون استفاده شد. الكترود كربني شيشه اي با گرافن اكسيد احيا شده ، نانوذرات طلا،پليمر اسيدآمينه آرژنين و آپتامر اصلاح شد. خصوصيات الكترود اصلاح شده توسط FESEM   ،EDS، FTIRطيف سنجي زير قرمز-تبديل فوريه   ولتامتري چرخه اي و طيف سنجي امپدانس الكتروشيميايي بررسي شد ووجود يك نانوكامپوزيت رسانا بر روي سطح الكترود را نشان داد. در حضور پروژسترون ، يك پيك اكسيداسيون مشخص به دست آمد كه در پتانسيل هاي كمتري نسبت به الكترود اصلاح نشده ظاهر شد. تركيب الكترود و شرايط آزمايشگاهي براي تعيين حساس   و گزينشي پروژسترون بهينه شدند. يك منحني كاليبراسيون خطي در طيف گسترده اي (nM     0.083   86.69 ng/mL 0.028–300) و حد تشخيص     M 0.03 ( ng/ml0.009) بر اساس( S / N = 3) بدست آمد. . تكرارپذيري روش با انجام ... اندازه گيري تكراري از پروژسترون (...مولار) بر حسب انحراف استاندارد نسبي %RSD   ... محاسبه گرديد. تكثير پذيري روش با تهيه ... الكترد با روش مشابه و اندازه گيري پروژسترون (...مولار) بر حسب %RSD بدست آمد. الكترود اصلاح شده ،در تعيين پروژسترون در نمونه هاي سرم خون انسان، فرآورده دارويي (آمپول) و نمونه هاي شير باموفقيت به كار رفت.
  6. Modification of glassy carbon electrode with silver nanowires and poly(methylene blue) and poly(para-aminobenzoic acid) and application in voltammetric determination of 4-nitrophenol
    Manzar Jamshidi 2018
  7. Modification of glassy carbon electrode with 1-Poly-arginine2-Poly-tyrosine3-Ag nanowires/poly arginineand application to voltammetric determination of nitrophenols.
    Mitra Soltani 2018
  8. Construction of electrochemical sensor based on glassy carbon electrode modified with copper nanoparticles and multiwalled carbon nanotubes for determination of 4-nitrophenol .
    ALI TAHER ABDALI 2017
    In this thesis we report the fabrication of copper nanoparticles on the multi-walled carbon nano-tubes (MWCNTs) composite film modified glassy carbon electrode ((Cu  /MWCNTs/GCE)) and it was characterized by cyclic voltammetry, a scanning electron microscope and The energy dispersive X-ray (EDX) analysis. Then it was application in the electrochemical Determination of 4-nitrophenol (4-NP) in real samples. Cyclic voltammograms displayed that (Cu  /MWCNTs/GCE) showed high electrochemical catalytic activity contrasted with the MWCNT/ GCE and Cu   / GCE modified. The (Cu  /MWCNTs/GCE) was observed to be appropriate for the selective determination of 4-NP by square wave voltammetry (SWV). Under the optimized condition the fabricated sensor demonstrated two linear concentration ranges from 0.2 to 12.3 and 12.3 to 298.0 ?M with detection limits of 0.06 ?M (S/N = 3). It was proved that this electrode can be utilized for the measurement of (4-NP) in real samples.
  9. Voltammetric and potentiometric determination of buprenorphine by using multi-walled carbon nanotubes – modified electrodes
    ERFAN DAEICHIN 2017
    This thesis contains two research projects that the abstract of them is given below:In the first part of the thesis, an electrochemical sensor for determination of buprenorphine by voltammetric method was created on glassy carbon electrode using multi-walled carbon nanotubes (MWCNTs–GCE) as an electrode modifier. Electrochemical oxidation of the BPR was proposed using voltammetric studies by cyclic voltammetry (CV), and differential pulse voltammetry (DPV) were carried out in Britton-Robinson buffer solution (pH 3.0). Optimizations of parameters including pH, amount of modifier, accumulation time and potential on the anodic peak current of BPR were accomplished. Under the optimum experimental conditions, the linear response range and the detection limit were calculated as 0.008-5.00 ?M and 1.11 nM respectively. Also the selectivity of the modified MWCNTs–GC electrode was studied in the presence of various interferences and accordingly the modified electrode was successfully employed for the determination of Buprenorphine in spiked blood serum and urine samples.  In the second part, carbon paste electrode modified with multi-walled carbon nanotubes (MWCNTs) and ion pair component of buprenorphine-potassium tetrakis(4-chlorophenyl) borate was used for determination of   Buprenorphine by potentiometric method. The response of this electrode in the concentration range of -   M was linear and a Nernstian slope of 58.1 mV dedecade-1 was obtained. Also the detection limit of 0.04 ?M was calculated. The modified carbon paste electrode had the response time about 6 s and in the pH range from 3 to 9 the potential of the solution is independent from pH. The selectivity of the modified electrode was studied in the presence of various interferences and accordingly was successfully employed for the determination of Buprenorphine in spiked blood serum and urine samples.  
  10. Voltammetric determination of methadone in biological fluids by nanoparticles and ionic liquids modified
    Maryam Khodadadi sarbry 2016
      1. Sensitive determination of nanomolar concentrations of methadone by differential pulse adsorptive stripping voltammetry in biological and pharmaceuticals samples based on electropolymerization of L-arginine on glassy carbon electrode. And 2. Differential pulse adsorptive stripping voltammetric determination of nanomolar concentrations of trimipramine based on electropolymerization of ?- cyclodextrin and L-arginine on glassy carbon electrode.    
  11. Investigation of the interactions of Thioridazine with ct-DNA using multispectroscopic methods and molecular modeling
    MOHAMMAD FALAHATI BAGHERABADI 2016
    This study was designed to examine the interaction of Thioridazine (TRZ) with calf thymus deoxyribonucleic acid (ct-DNA) under physiological conditions. To understand the action mechanism between TRZ and ct-DNA, the binding of TRZ with ct-DNA was investigated by a combined experimental and computational approach. Viscosity measurements, different spectroscopic methods (UV/Vis spectrophotometry, spectrofluorimetry and circular dichroism) and docking studies were used to study the process. A competitive binding experiment and effect of ionic strength mensuration were carried out to investigate the binding mechanism of TRZ and ct-DNA. The binding constant for the interaction of TRZ with ct-DNA at 298, 310 and 315 K were 3.00, 8.33, 23.33 ×104 mol-1 respectively by using UV/Vis absorption. The thermodynamic parameters were obtained by the UV/Vis absorption method, which suggested that hydrophobic force might play a major role in the binding of TRZ to ct-DNA. Furthermore, the drug induces detectable changes in the CD spectrum of ct-DNA as well as changes in its viscosity.
  12. potentiometric determination of methadone in biological fluids based on a carbon paste electrode modified with ion-pair complex and multi-walled carbon nanotubes
    Moslem Ardashiri 2015
  13. Spectroscopic studies of the interaction between the immunosuppressive drug , Azathioprine , and DNA & Binding of Azathioprine to Human Serum Albumin :Spectroscopic and Molecular Modeling Investigations
    Gelare Rasaie 2015
  14. separation and determination of atorvastatin in biological samples by DLLME-SFO-HPLC
    2015
  15. Square-Wave Voltammetric Determination of Azathioprine Using a Graphene-Chitosan Modified Glassy Carbon Electrode
    Zahra Hatami 2013
  16. Electrochemical sensor for determination of Amantadine hydrochloride based on a competitive host–guest complexation.
    2013
  17. Voltammetric Determination of amantadine using carbon – paste electrode modified with beta-cyclodextrin
    Sajad Reyahee 2013
  18. Sensitive Determination of Paracetamol Using a Graphene-Modified Carbon Paste Electrode and Voltammetric Determination of Captopril Using Chlorpromazine as a HomogeneousMediator and Electrocatalytic Oxidation of Captopril by Iodide and Its Application to Pharmaceutical Analysis and Electrocatalytic
    Hossein Bahramipur 2011
  19. taeah alkjrwn aslah sjodh
    Sedigheh Ranjbar 2011
  20. Conductometric and Spectroflurimetic Study of Complexation between Thiabendazol and some Transition Metals
    2010
  21. sensitive spectrofluorimetric determination of desipramine in the presence of beta-cyclodextrim and construction of carbon paste modified electrods developed for determination of desipramine in some real samples with po
    NEGIN EZATI 2010
  22. Conductance Study of the Thermodynamics of Micellization of Cetyl Trimethyl Ammonium Bromide(CTAB) in (Water + Dioxane) Containing Dilute Electrolyte Solutions
    2009

Update: 2026-11-18

افراد توان خواه
رنگ متن
رنگ پس زمینه
اندازه فونت
+ A -
پنهان سازی تصاویر
تنظیم کنتراست
فاصله بین کلمات
خط راهنما
فاصله بین خطوط
نوع فونت
بزرگنمایی انداره صفحه
+ -
توقف انیمیشن ها