Journal Paper

1. "Analytical modeling of functionally graded carbon nanotube-reinforced composite plates under low-velocity impact"
   Saeid Feli, Boromand Karimi, SEYED SAJAD JAFARI
   Mechanics of Advanced Composite Structures, pp.281-294, 2024
2. "Dynamic and electrical responses of a curved sandwich beam with glass reinforced laminate layers and a pliable core in the presence of a piezoelectric layer under low-velocity impact"
   Nima Shahveisi, Saeid Feli
   APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, pp.155-178, 2024
3. "Grooves and Cross Section Effects on Energy Absorption of S-Shaped Tubes Under Axial Quasi-Static and Impact Loading"
   Erfan Sohaili, Saeid Feli
   Journal of The Institution of Engineers (India): Series C, pp.215-232, 2024
4. "Low Velocity Impact Response Analysis of Functionally Graded Piezoelectric Plates Using Finite Element Method and a Two Degrees of Freedom Spring Mass Model"
   EHSAN MEHRDAD, Saeid Feli, Raj Das
   ADVANCED ENGINEERING MATERIALS, 2023
5. "Synergistic influence of MWCNTs/RGO on low-velocity impact response and mechanical properties of carbon fiber/epoxy composite"
   Mohammad Amin Bahrami, Saeid Feli
   Proceedings of the Institution of Mechanical Engineers Part N-Journal of Nanomaterials Nanoengineering and Nanosystems, 2023
6. "Analytical model of low-velocity impact penetration of sandwich panels with metal foam core and nanocomposite face sheets"
   Mohammad Amin Bahrami, Saeid Feli
   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, pp.1-17, 2023
7. "Simulation of residual stress and distortion in welded carbon steel pipe by considering solid-state phase transformation"
   محمدرضا جهانبان, Saeid Feli
   Journal of Solid Mechanics, 2023
8. "Analytical modeling of low-velocity impact (LVI) on composite pipe with protective GLARE layer and flexible core"
   Nima Shahveisi, Saeid Feli
   Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2022
9. "Low velocity impact response of sandwich beams with composite face-sheets and foam or honeycomb core: analytical modeling and finite element simulation"
   Poorya Karvan, Saeid Feli
   AUT Journal of Mechanical Engineering, 2022
10. "A Theoretical Investigation on Low Velocity Impact on Composite Plates Reinforced with Shape Memory Alloy Wires Including Damage Evolution"
    Mohammad Hossein Yas, Saeid Feli, Shadi Vaziri
    Journal of The Institution of Engineers (India): Series C, 2021
11. "Experimental Investigation of Impact Damage Response of Sandwich Panels with Epoxy/woven-Fiberglass/nanoSilica Composite Face-sheets"
    Maziar Mahdipour Jalilian, Saeid Feli
    Journal of Stress Analysis, pp.57-67, 2020
12. "Effects of Functionalized Multi-Walled Carbon Nanotubes on the Low-Velocity Impact Response of Sandwich Plates"
    احسان رشيدي, Saeid Feli
    AUT Journal of Mechanical Engineering, pp.91-100, 2020
13. "An analytical and experimental investigation considering the effect of material flow velocity on tensile strength of a steel alloy joint produced by friction stir welding process"
    Behzad Hadi, Mohammad Ebrahim Aalami Al Agha, Saeid Feli
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2020
14. "Analysis of low velocity impact on curved sandwich beams with FML face sheets and flexible core"
    Nima Shahveisi, Saeid Feli
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2020
15. "Analytical modeling of carbon nanotubes effects and their distribution patterns on the low velocity impact response of sandwich panels"
    Saeid Feli, احسان رشيدي
    JOURNAL OF SANDWICH STRUCTURES and MATERIALS, 2019
16. "Dynamic progressive buckling of thin-wall grooved conical tubes under impact loading"
    Saeid Feli, ERFAN MAKHSOUSSE, SEYED SAJAD JAFARI
    INTERNATIONAL JOURNAL OF CRASHWORTHINESS, 2019
17. "Temperature-dependent analysis of axially functionally graded CNT reinforced micro-cantilever beams subjected to low velocity impact"
    MEHDI RANJBAR ROEINTAN, Saeid Feli
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, pp.1154-1168, 2019
18. "Analytical modeling of low velocity impact on carbon nanotube-reinforced composite (CNTRC) plates"
    Saeid Feli, ليلا كرمي, SEYED SAJAD JAFARI
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, pp.394-406, 2019
19. "Mechanical and low-velocity impact properties of epoxy-composite beams reinforced by MWCNTs"
    MEHDI RANJBAR ROEINTAN, Saeid Feli
    JOURNAL OF COMPOSITE MATERIALS, pp.693-705, 2019
20. "Three-dimensional solution of low-velocity impact on sandwich panels with hybrid nanocomposite face sheets"
    Saeid Feli, Maziar Mahdipour Jalilian
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, pp.579-591, 2018
21. "Low velocity impact analysis of an axially functionally graded carbon nanotube reinforced cantilever beam"
    MEHDI RANJBAR ROEINTAN, Saeid Feli
    POLYMER COMPOSITES, pp.969-983, 2018
22. "Analytical modeling for perforation of foam-composite sandwich panels under high-velocity impact"
    Saeid Feli, SEYED SAJAD JAFARI
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, pp.401-412, 2017
23. "Theoretical model of low-velocity impact on foam-core sandwich panels using finite difference method"
    Saeid Feli, Maziar Mahdipour Jalilian
    JOURNAL OF SANDWICH STRUCTURES and MATERIALS, pp.261-290, 2017
24. "Analytical and experimental study of high-velocity impact on ceramic/nanocomposite targets"
    H Shanazari, GH Liaghat, Saeid Feli, H Hadavinia
    JOURNAL OF COMPOSITE MATERIALS, pp.3743-3756, 2017
25. "Evaluation Effects of Modeling Parameters on the Temperature Fields and Residual Stresses of Butt Welded Stainless Steel Pipes"
    Saeid Feli, Mohammad Ebrahim Aalami Al Agha, محمدرضا جهانبان
    Journal of Stress Analysis, pp.25-33, 2016
26. "A modified new analytical model for low-velocity impact response of circular composite sandwich panels"
    Saeid Feli, SAMAN KHODADADIAN, M. Safari
    JOURNAL OF SANDWICH STRUCTURES and MATERIALS, pp.552-578, 2016
27. "Experimental and optimization of mechanical properties of epoxy/nanosilica and hybrid epoxy/fiberglass/nanosilica composites"
    Saeid Feli, Maziar Mahdipour Jalilian
    JOURNAL OF COMPOSITE MATERIALS, pp.3892-3903, 2016
28. "3-D numerical evaluation of residual stress and deformation due welding process using simplified heat source models"
    Amirhossein Eslampanah, Mohammad Ebrahim Aalami Al Agha, Saeid Feli, mohamad reza ghaderi
    Journal of Mechanical Science and Technology, pp.341-348, 2015
29. "Plastic Wave Propagation Model for Perforation of Metallic Pates by Blunt Projectiles"
    Saeid Feli, اسد نوري تبار
    Journal of Solid Mechanics, 2014
30. "Analysis preheat effect on thermal cycle and residual stress in welded connection by FE simulation"
    Mohammad Ebrahim Aalami Al Agha, Mehrdad Forotan, Saeid Feli
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2014
31. "Investigation of Hydrostatic Pressure Effect on the Residual Stresses of Circumferentially Butt-Welded Steel Pipes"
    Mehrdad Forotan, Mohammad Ebrahim Aalami Al Agha, Saeid Feli, Saeid Nickabadi
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2012
32. "An analytical model for composite sandwich panels with honeycomb core subjected to high-velocity impact"
    Saeid Feli, MOHAMMAD HADI NAMDARI POUR
    COMPOSITES PART B-ENGINEERING, 2012
33. "Finite Element Simulation of Welding Sequences Effect on Residual Stresses in Multipass Butt-Welded Stainless Steel Pipes"
    Saeid Feli, Mohammad Ebrahim Aalami Al Agha, Mehrdad Forotan, احسان برزآبادي فراهاني
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2012
34. "Finhte Element Simulation of Ceramic/Composite Armor Under Ballistic Impact"
    Saeid Feli, محمدرضا عسكري
    COMPOSITES PART B-ENGINEERING, 2011
35. "An Analytical Model for Perforation of Ceramic/multi-layered Planar Woven Fabric Targets by Blunt Progectiles"
    Saeid Feli, Mohammad Hossein Yas, محمدرضا عسكري
    COMPOSITE STRUCTURES, 2011
36. "Analytical solution for penetration of deformable blunt projectiles into the metallic targets"
    d r, gh l, Saeid Feli, d n
    Mechanika, 2010
37. "FEM Simulation of Splatting of a Molten Droplet in Thermal Spray Coating"
    Mohammad Ebrahim Aalami Al Agha, Saeid Feli, A A
    COMPUTATIONAL MATERIALS SCIENCE, 2010
38. "A New Analytical Model of Normal Penetration of Projectiles into the Light-weight Ceramic-metal Targets"
    Saeid Feli, Mohammad Ebrahim Aalami Al Agha, زين العابدين احمدي
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2010
39. "The mechanicsof normal and oblique penetration of conical projectiles into multi layer metallic targets"
    gh l, h m, Saeid Feli
    Iranian Journal of Science and Technology Transaction A-Science, 2005

Conference Paper

1. "FEA of Electrod Velocity Effect on Thermal Cycle and Residual Strees in Connected by Multi Pass Weld"
   Saeid Feli, Mehrdad Forotan, Mohammad Ebrahim Aalami Al Agha, احسان برزآبادي فراهاني
   Advances in Materials and Processing Technologies,
2. "Distortion and Thermal Analysis in a T-fillet Welded Joint Using FEM"
   Amirhossein Eslampanah, Mohammad Ebrahim Aalami Al Agha, Saeid Feli
   AMPT 2011,