Defense Date: 2026/18/11
Student

Ehsan Azadi

Department / Program Department of Chemistry | Applied Chemistry

Synthesis and characterization of heterojunction of spinel type Ferrites (MFe2O4, M= Cu, Ca)/P25-TiO2 and a nano zero-valent iron-modified P25-TiO2/ZnO, and investigation of their photocatalytic activity in degradation of oxytetracycline under visible light irradiation

Abstract

At the first, this thesis focuses on the fabrication of a ternary P25/Fe?/ZnO heterojunction through wet impregnation, resulting in a visible-light-active photocatalyst with a narrowed bandgap of 2.84 eV. A full suite of characterization techniques including TEM, BET, XRD, FT-IR, and DRS was employed to thoroughly investigate its structural morphology, surface area, crystallinity, and optical absorption properties. To systematically evaluate the degradation of OTC, Response surface methodology was applied to model the interactive effects of three critical operational parameters: catalyst dosage, potassium persulfate (K?S?O?) concentration, and initial pH. Under the statistically optimized conditions—0.28 gL-1 catalyst, 3.02 mgL-1 persulfate, and pH 7.5—the system achieved an impressive 89.3% OTC removal within 120 minutes of visible illumination. This superior performance is rationally attributed to the favorable electrostatic attraction at pH 7.5, where the negatively charged catalyst surface strongly binds to the positively charged dimethylammonium group of the OTC molecule, thereby enhancing pre-adsorption and subsequent surface-mediated photoreactions. Kinetic investigations confirmed that the adsorption process fits the pseudo-second-order model, indicating a chemisorption-dominated mechanism. Furthermore, a hot filtration test validated the heterogeneous nature of the catalyst by demonstrating negligible activity loss upon catalyst removal, thus ruling out homogeneous contributions from leached ions. Finally, GC-MS analysis of the degradation byproducts enabled the proposal of a plausible oxidative mineralization pathway, shedding light on the stepwise breakdown of the antibiotic structure. Continuing the thesis, a magnetically recoverable PCFO Z-scheme nanocomposite, strategically developed to overcome the twin challenges of difficult catalyst recovery and rapid charge carrier recombination. This material exhibits an exceptionally high BET surface area of 474.64 m²/g, a suitable bandgap of ~2.6 eV for efficient visible-light harvesting, and strong ferrimagnetic behavior with a saturation magnetization of ~14.1 emu/g, which facilitates rapid and convenient magnetic separation after treatment. PL analysis confirmed a significant suppression of electron-hole pair recombination, providing strong evidence for the successful formation of an effective heterointerface. Crucially, radical scavenging assays identified •O?? and •OH radicals as the dominant reactive species. This specific radical profile not only confirms the charge transfer pathway but also substantiates a Z-scheme mechanism over the conventional Type-II configuration; the Z-scheme arrangement is particularly advantageous as it preserves the high reducing power of the CB and the high oxidizing power of the VB simultaneously. Using a Central composite design under RSM, the degradation conditions were finely tuned, with the optimum parameters—0.30 gL-1 catalyst, 2.78 mgL-1 persulfate, and pH 5.28—yielding 87.3% OTC degradation in 120 minutes. In conclusion, the synergistic convergence of an ultra-high surface area for enhanced pollutant adsorption, extended visible-light absorption, superior spatial charge separation via the Z-scheme, and effortless magnetic recoverability firmly establishes the PCFO nanocomposite as a highly sustainable and promising material for the effective remediation of antibiotic-contaminated wastewater streams.