Defense Date: 2026/16/11
Student

AmirHossein Rasouli

Department / Program Engineering | Dept. of Mechanical Engineering_test

Experimental Analysis of Low-Velocity Impact on Functionally Graded Porous Polymer Beams

Supervisor Saeid Feli

Abstract

Functionally graded porous beams have been employed in various engineering applications, including aerospace and automotive industries, owing to their high strength-to-weight ratio and energy absorption capability. Through the gradual variation of their material properties, these beams can exhibit superior mechanical performance compared with homogeneous materials. In this thesis, the dynamic behavior of functionally graded porous polymeric beams subjected to low-velocity impact is experimentally investigated. Specimens incorporating three porosity distributions, namely FGA, FGV, and uniform distribution (UD) with a constant total void volume, were designed and fabricated using fused deposition modeling (FDM) and carbon-fiber-reinforced polylactic acid (PLA-CF) filament. Low-velocity impact tests were conducted at three impact energy levels of 2, 4, and 8 J. The mechanical response of the beams was evaluated based on force–time, displacement–time, force–displacement, energy–time, and velocity–time curves. Furthermore, the mechanical properties of the filament were determined through tensile testing in accordance with the ASTM D638 standard. The results revealed that fracture occurred in the beams with FGA and constant-volume UD porosity distributions at an impact energy of 8 J, whereas the beam with FGV porosity remained intact. The lowest and highest penetration depths were observed in the FGA and constant-volume UD configurations, respectively. At the impact energy level of 8 J, the FGA configuration exhibited the highest energy absorption, while the lowest energy absorption was associated with the FGV configuration. During impactor contact with the beam, the region above the neutral axis undergoes compressive deformation, whereas the region below the neutral axis experiences tensile deformation. As the void volume fraction above the neutral axis increases, the beam exhibits a mechanical response similar to that of quasi-brittle materials. Overall, the FGV porosity configuration demonstrated superior mechanical performance compared with the FGA and constant-volume UD configurations.